Panasonic SX-KN7000 User Manual
Panel Memory Output
These are settings affect the transmission data when the PANEL MEMORY buttons are operated.
1.
On the MIDI MENU display, select PANEL
MEMORY OUTPUT.
MEMORY OUTPUT.
• The display looks similar to the following.
2.
Use the P.MEM
∧
and
∨
buttons to select a
PANEL MEMORY number.
3.
Use the OFF/ON
∧
and
∨
buttons to specify
whether the data in the selected PANEL
MEMORY number is transmitted or not.
MEMORY number is transmitted or not.
4.
Use the PART
∧
and
∨
buttons to select a
part (RIGHT 1, RIGHT 2 or LEFT).
5.
Use the PRGRAM CHANGE
∧
and
∨
buttons
to specify a program change number (0 to 127,
or OFF).
or OFF).
6.
Use the BANK LSB
∧
and
∨
buttons to specify
a BANK LSB (0 to 127).
7.
Use the BANK MSB
∧
and
∨
buttons to specify
a BANK MSB (0 to 127).
8.
Use the VOLUME
∧
and
∨
buttons to specify
the volume (0 to 127, or OFF).
9.
Repeat steps 4 to 7 for each part, as neces-
sary.
sary.
10.
Repeat steps 3 to 9 for each PANEL MEMORY
number, as necessary.
number, as necessary.
Computer Connection
These settings are used to select the mode related to MIDI signal flow when a personal computer is
connected to the USB terminal of this instrument.
• When connecting to a personal computer, install the USB driver on the included CD-ROM to the
connected to the USB terminal of this instrument.
• When connecting to a personal computer, install the USB driver on the included CD-ROM to the
computer first. (Refer to the separate manual for more information.)
1.
Turn off the power to this instrument.
2.
Connect a personal computer to the USB ter-
minal on the rear of this instrument.
minal on the rear of this instrument.
3.
Turn on the power to this instrument.
4.
On the MIDI MENU display, select COM-
PUTER CONNECTION.
PUTER CONNECTION.
• The display looks similar to the following.
5.
Use the
∧
and
∨
buttons to select a mode.
NORMAL:
Ordinary mode
PC as master:
The mode which is appropriate for data trans-
mission
mission
KN as master:
The mode when this instrument is used as the
master keyboard.
master keyboard.
KN as slave:
The mode when this instrument is used as a
slave instrument.
slave instrument.
INTERFACE:
The mode when this instrument is used as a
connecting device between a PC with only
USB terminals and an instrument with only
MIDI terminals.
connecting device between a PC with only
USB terminals and an instrument with only
MIDI terminals.
MID
I
Part XIII
MIDI
196
QQTG0671