Roland ARX-01 User Manual
24
Flam/Roll settings
(Tone/Flam/Roll screen)
(Tone/Flam/Roll screen)
fig.02-002.eps
Here you can apply a
fram or
roll effect to each tone.
You can use note velocity to switch the flam or roll effect on/off.
Flam-related parameters
fig.flam.eps
For details on the “note” that can be selected for the Rate
parameter, refer to
parameter, refer to
Parameter
Value
Description
Flam/Roll Velocity
Threshold
Threshold
0–127
Boundary between Upper and Lower
Flam/Roll Type
Upper
Upper
OFF,
FLAM,
ROLL
FLAM,
ROLL
Selects the way in which the tone will
sound when the note velocity is above the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
sound when the note velocity is above the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
Flam/Roll Type
Lower
Lower
OFF,
FLAM,
ROLL
FLAM,
ROLL
Selects the way in which the tone will
sound when the note velocity is below the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
sound when the note velocity is below the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
Parameter
Value
Description
Rate
1–100,
note
note
Time interval between flam notes
Offset
-100–
+100
+100
Difference in strength between note and flam note(s)
Flam Time
1–16
Number of flam notes
Time Ve-
locity Sens
locity Sens
-100–
+100
+100
Change in the number of flam notes in response to
velocity. With a positive (+) setting, velocity will in-
crease the number of flam notes; with a negative set-
ting (-), velocity will decrease the number of flam
notes.
velocity. With a positive (+) setting, velocity will in-
crease the number of flam notes; with a negative set-
ting (-), velocity will decrease the number of flam
notes.
Feel
0–32
Amount of random change in the strength of flam
notes and their time interval
notes and their time interval
Time
V
elocity
Note On
Last Note
(Velocity = Note On)
Rate
Offset
Rate
ARX-01_e.book 24 ページ 2008年2月19日 火曜日 午後4時7分