Roland 60S User Manual
23
Before You Start Playing
The confirmation message appears on screen.
fig.00-40.eps
If you touch <Cancel>, the Factory Reset will not be
performed, and you will return to the System screen.
performed, and you will return to the System screen.
5.
When you touch <OK>, the Factory Reset
operation will begin, and the settings will return
to the factory-set condition.
operation will begin, and the settings will return
to the factory-set condition.
NOTE
Never switch off the power while this operation is in
progress!
progress!
fig.00-40.eps
NOTE
Loading factory default settings will erase any Registrations
currently in the memory of the AT-90S/80S/60S. To save the
registrations you are currently using, refer to
currently in the memory of the AT-90S/80S/60S. To save the
registrations you are currently using, refer to
NOTE
If you want to restore the factory settings for only the
Rhythm [Disk] button and [World] button, refer to p. 70, 73.
Rhythm [Disk] button and [World] button, refer to p. 70, 73.
You can also use the following method to return to the
factory-set condition.
factory-set condition.
1.
Make sure there is no floppy disk in the disk
drive before carrying out the procedure.
drive before carrying out the procedure.
2.
Turn off the power.
3.
While holding down the [One Touch
Program] button, press the [Power On] switch
to turn the power on.
Program] button, press the [Power On] switch
to turn the power on.
fig.00-41
Hold down the [One Touch Program] button until
the following is displayed.
the following is displayed.
fig.00-40.eps
NOTE
Never switch off the power while this operation is in
progress!
progress!
Power On
Program
One Touch
Set