Roland 60S User Manual

Chapter 1 Selecting and Playing Sounds

■

Changing Drums/SFX Sets

Immediately after the power is turned on, the POP drum set will sound.

As the drum set, you can choose from 16 types of drum set and one type of
sound effect. When you change the drum set, the sound produced by each
note will change.

Press the [Drums/SFX] button, getting its indicator to light

up.

The Drums/SFX screen will be displayed for several seconds.

fig.01-33

While the Drums/SFX screen is displayed, touch a Drum/SFX

set name in the screen.

The [Drums/SFX] button indicator will begin to blink.

You can select from 16 different Drum Sets and one set of Sound Effects as
follows:

POP, ROCK, JAZZ BRUSH, VOX DRUM, STANDARD, STANDARD2,

ROOM, ROOM2, POWER, ELECTRONIC, TR-808, DANCE, JAZZ,

BRUSH, BRUSH2, ORCHESTRA, SOUND EFFECTS

Press the [Drums/SFX] button once again.

The [Drums/SFX] button indicator will be lit constantly, and the selected
Drum Set Type will be applied.

For the types of manual
drum set and the drum
sounds played by each key,
refer to “Drum/sound
effect set list” (p. 198).

You can also confirm the
Drums/SFX set by
touching <Exit> in the
Drums/SFX screen.
You can also play the lower
manual to confirm the
drum set.

NOTE

After the Drums/SFX
(drums/sound effects)
screen is displayed, it will
close automatically after
several seconds unless you
touch the screen to select a
drums/sound effects set. If
you wish to switch drums/
sound effect sets, quickly
select the desired drums/
sound effect set while the
Drums/SFX (drums/
sound effects) screen is
displayed.

Min

Max

Min

Max

Min

Max

Min

Max