Roland FR-5 User Manual
Editing sounds | 11. UTILITY parameters
74
r
FR-7/FR-5 V-Accordion
ters. Careful: there are also parameters that allow you
to copy just the Reverb, Chorus or Delay settings. Do
not use this parameter if you only wish to reuse the
Reverb settings of another Set, for example.
to copy just the Reverb, Chorus or Delay settings. Do
not use this parameter if you only wish to reuse the
Reverb settings of another Set, for example.
(1) After selecting this page, press the [DATA÷ENTER]
knob until the following page appears:
(2) Use the [DATA÷ENTER] knob to select the Set whose
effects settings you wish to copy to the current
Set.
You can also select another memory for “TO” if you
want to copy the settings to another Set than the
one that is currently selected.
Set.
You can also select another memory for “TO” if you
want to copy the settings to another Set than the
one that is currently selected.
(3) Press [MENU÷WRITE] to copy the settings.
The display confirms this operation:
These three parameters allow you to
copy the Reverb, Chorus or Delay set-
tings of another Set to the currently
selected Set. Unlike the “Copy ALL
Effects” parameter, which copies all
effects settings, these three parame-
ters only import the selected proces-
sor’s settings. That way, you can use
the Reverb settings of Set 1, the Cho-
rus settings of Set 10 and the Delay
settings of Set 28 in Set 5.
copy the Reverb, Chorus or Delay set-
tings of another Set to the currently
selected Set. Unlike the “Copy ALL
Effects” parameter, which copies all
effects settings, these three parame-
ters only import the selected proces-
sor’s settings. That way, you can use
the Reverb settings of Set 1, the Cho-
rus settings of Set 10 and the Delay
settings of Set 28 in Set 5.
(1) After selecting the page that corresponds to the
effects processor whose settings you wish to copy,
press the [DATA÷ENTER] knob until the relevant
page appears:
press the [DATA÷ENTER] knob until the relevant
page appears:
(2) Use the [DATA÷ENTER] knob to select the Set whose
effects settings you wish to copy to the current
Set.
You can also select another memory for “TO” if you
want to copy the settings to another Set than the
one that is currently selected.
Set.
You can also select another memory for “TO” if you
want to copy the settings to another Set than the
one that is currently selected.
(3) Press [MENU÷WRITE] to copy the settings.
The display confirms this operation:
This parameter allows you to
copy the settings of one Set to
another Set memory. It copies
everything related to a Set: the
Common parameters (including
the effects) as well as the parameters of the various
sections (Treble, Orchestra, Bass, etc.).
Warning: All settings of the target memory are over-
written. It might therefore be a good idea to archive
the target Set using “11.8 Bulk Dump SET” before pro-
ceeding.
copy the settings of one Set to
another Set memory. It copies
everything related to a Set: the
Common parameters (including
the effects) as well as the parameters of the various
sections (Treble, Orchestra, Bass, etc.).
Warning: All settings of the target memory are over-
written. It might therefore be a good idea to archive
the target Set using “11.8 Bulk Dump SET” before pro-
ceeding.
(1) On the page shown above, press the [DATA÷ENTER]
button.
The display now changes to:
The display now changes to:
(2) Press the [DATA÷ENTER] knob to select the “FROM”
parameter, then turn it to select the Set whose set-
tings you wish to copy.
By default, the FR-7/FR-5 selects the number of the
Set you are currently using.
tings you wish to copy.
By default, the FR-7/FR-5 selects the number of the
Set you are currently using.
(3) Press the [DATA÷ENTER] knob to select the “TO”
parameter, then turn it to select the Set memory
to which the settings should be copied.
Carefully check whether you have selected the cor-
rect Set memory, then…
to which the settings should be copied.
Carefully check whether you have selected the cor-
rect Set memory, then…
(4) Press [MENU÷WRITE] to copy the settings.
The display confirms this operation:
These two functions allow you to transmit all of the
FR-7/FR-5’s settings or just the settings of the currently
selected Set to an external MIDI device (which could be
a second FR-7/FR-5). See page 89 for details.
FR-7/FR-5’s settings or just the settings of the currently
selected Set to an external MIDI device (which could be
a second FR-7/FR-5). See page 89 for details.