Roland HP107 User Manual
48
Chapter 6. Connecting External Devices
Connecting MIDI Devices
By connecting an external MIDI device and exchanging
performance data, you can control the performances on one
device from the other. For instance, you can output sound
from the other instrument or switch tones on the other
instrument.
performance data, you can control the performances on one
device from the other. For instance, you can output sound
from the other instrument or switch tones on the other
instrument.
■
What’s MIDI?
MIDI stands for Musical Instrument Digital Interface, an
international standard which allows performance
information to be communicated among electronic musical
instruments and computers.
international standard which allows performance
information to be communicated among electronic musical
instruments and computers.
The HP107 provides MIDI connectors, which allow
performance data to be exchanged with external devices.
When these connectors are used to connect the HP107 to
external devices, an even wider range of possibilities
becomes available.
performance data to be exchanged with external devices.
When these connectors are used to connect the HP107 to
external devices, an even wider range of possibilities
becomes available.
*
A separate publication titled “MIDI Implementation” is also available.
It provides complete details concerning the way MIDI has been
implemented on this unit. If you should require this publication (such
as when you intend to carry out byte-level programming), please
contact the nearest Roland Service Center or authorized Roland
distributor.
Connection examples
*
To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices
before making any connections.
Playing the HP107 from a MIDI sequencer/
Recording an HP107 performance on a MIDI
sequencer
Recording an HP107 performance on a MIDI
sequencer
fig.midi2.e
*
Set Local Off if you have connected the HP107 to a MIDI sequencer.
MIDI sequencer to MIDI Thru mode (so that messages received at
MIDI IN will be re-transmitted without change from MIDI OUT).
For details, refer to the owner’s manual of your MIDI sequencer.
Perform on the HP107 to play a MIDI sound
generator
generator
fig.midi1.e
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
related settings.
How to enter function mode
1.
Hold down the [Split] button, and press the [Chorus]
button.
The HP107 switches to the set mode.
The indicators for the [Split] and [Chorus] buttons and
the button to which the function is assigned start
flashing.
the button to which the function is assigned start
flashing.
Setting various functions
2.
Press the button to which the desired function is
assigned.
The indicators for pressed button, [Split] button, and
[Chorus] button flash.
[Chorus] button flash.
For details on the contents of each function, refer to the
explanations that follow.
explanations that follow.
3.
Press the [-] or [+] button to change the value.
If you press the [-] and [+] buttons simultaneously, the
setting will return to the original value.
setting will return to the original value.
How to exit function mode
4.
Press the [Split] or [Chorus] button.
The button’s indicator will return to the previous state.
In
Out
MIDI
HP107
MT Series
* MT-90s/80s has no MIDI Out
connector.
connector.
OUT
THRU
IN
MIDI
HP107
Sound Module
HP107_e.book 48 ページ ２００５年７月２５日 月曜日 午後４時５０分