Zoom MRT-3 User Manual
This section shows how to play and record patterns of the MRT-3 in pattern mode.
Playing a Pattern
The MRT-3 has 396 read-only preset patterns (A01 – D99) and 99 read/write user patterns (U01 –
U99). To select and play a pattern, proceed as follows.
U99). To select and play a pattern, proceed as follows.
In the factory default condition, all user patterns are empty.
1.
Press the [PATTERN] key.
The [PATTERN] key lights up and the MRT-3 goes into pattern mode. The display shows
the bank and number of the currently selected pattern.
the bank and number of the currently selected pattern.
2.
Use the [VALUE +/-] keys to select the pattern number.
In pattern mode, the [VALUE +/-] keys serve to select the pattern. For example, if you
repeatedly press the [VALUE +] key, the patterns are switched in the order U01 ... U99
➝A01 ... A99 ➝ B01 ... B99 ➝ C01 ... C99 ➝ D01 ... D99 ➝ U01.
repeatedly press the [VALUE +] key, the patterns are switched in the order U01 ... U99
➝A01 ... A99 ➝ B01 ... B99 ➝ C01 ... C99 ➝ D01 ... D99 ➝ U01.
3.
To directly switch the bank, press the [FUNCTION] key and then use the [VALUE
+/-] keys.
+/-] keys.
This switches only the bank and keeps the pattern number.
The [FUNCTION] key serves for making various settings of the MRT-3. The actual effect of pressing
the key depends on the currently selected mode and on which other keys are used together with it.
the key depends on the currently selected mode and on which other keys are used together with it.
H
INT
D 0 5
@ 0 5
A 0 1
Pattern number
Bank (A - D, U)
For an empty user pattern,
"E" is shown here.
"E" is shown here.
N
OTE
ZOOM
MRT-3
Using
P
atter
n
s
(Patter
(Patter
n
Mode)
Mode)
14
Using Patterns
(Pattern Mode)