Behringer UB802 User Manual

EURORACK

UB502/UB802/UB1002/UB1202

1. INTRODUCTION

Congratulations! In purchasing our EURORACK UB502/UB802/

UB1002/UB1202 you have acquired a mixing console whose

small size belies its incredible versatility and audio performance.

The range of inputs and outputs comprises microphone inputs

(with +48 V phantom power supply, except UB502), line inputs,

possibilities for connecting effects devices, connectors for a 2-

track master machine (e.g. DAT recorder) and a monitor system

consisting of monitor loudspeaker(s) and power amplifier (except

for UB502).
IMP INVISIBLE MIC PREAMP

The microphone channels are fitted with BEHRINGERs brand

new premium quality IMP INVISIBLE MIC PREAMPs that boast the

following features:
s

130 dB dynamic range for an incredible amount of headroom

A bandwidth ranging from below 10 Hz to over 200 kHz for

crystal-clear reproduction of even the finest nuances

The extremely low-noise and distortionfree circuitry gua-

rantees absolutely natural and transparent signal repro-

duction

They are perfectly matched to every conceivable micro-

phone with up to 60 dB gain and +48 volt phantom power

supply (UB502: no phantom power)

They enable full utilisation of the greatly extended dynamic

range of your 24-bit/192 kHz HD recorder, thereby main-

taining optimal audio quality

CAUTION!

We should like to draw your attention to the fact

that extreme volumes may damage your hearing

and/or your headphones or loudspeakers. Turn the

MAIN MIX control and PHONES control in the main

section fully counter-clockwise before you switch

on the unit. Always be careful to set appropriate

volume levels.

1.1 General mixing console functions

A mixing console fulfils three main functions:

Signal processing: Preamplification, level adjustment,

mixing of effects, frequency equalization.

Signal distribution: Summing of signals to the aux sends

for effects processing and monitor mix, distribution to one

or several recording tracks, power amp(s), control room

and 2-track outputs.

Mix: Setting the volume level, frequency distribution and

positioning of the individual signals in the stereo field, level

control of the total mix to match the recording devices/

crossover/power amplifier(s). All other mixer functions can

be included in this main function.

The interface of BEHRINGER mixing consoles is optimized for

these tasks enabling you to easily keep track of the signal path.

1.2 The users manual

The users manual is designed to give you both an overview of

the controls, as well as detailed information on how to use them.

In order to help you understand the links between the controls,

we have arranged them in groups according to their function.

The illustrations at the beginning of each chapter show the

controls described in each respective chapter.

The block diagram supplied with the mixing console

gives you an overview of the connections between

the inputs and outputs, as well as the associated

switches and controls.

1. INTRODUCTION

FOREWORD

Dear Customer,
Im sure youre one of

those people who have

devoted themselves body

and soul to your chosen

area and no doubt this has

transformed you into an

expert in your field!
Well, for over 30 years,

my passion has been

music and electronics.

This not only led me to

establish BEHRINGER,

but also enabled me to

convey and share my

enthusiasm with my

employees.
During all the years Ive

been involved with

studio technology and

end users, I have developed a feel for the things that really

count, such as sound quality, reliability and ease of use. Whats

more, I have always had the desire to push the boundaries of

technical possibilities to the extreme.

It was precisely this motivation that prompted me to start work

on a new series of mixing consoles. Since our EURORACKs had

already set new standards world-wide, I knew the development

objectives behind the products bearing my initials had to be

especially ambitious.

Thus, the concept and design of the new UB mixing consoles

bear my signature. The design work, the entire circuit diagram

and PCB development, and even the mechanical concepts are

my own work. I carefully selected each individual component

with the aim of pushing the mixing consoles analog and digital

technologies to their limits.

My vision was to enable you, the user, to give free rein to your

true potential and creativity. The result is incredibly powerful mixing

consoles that offer intuitive operation. They cannot fail to impress

with their extremely flexible routing possibilities plus fantastic wealth

of functions. Innovative technologies, such as the completely new

IMP Invisible Mic Preamps, guarantee optimum sound quality.

And extraordinarily high-quality components provide unrivalled

reliability, even under extreme loads.

Your new UB mixing console is of high quality yet is simple to

use; youll soon appreciate that I, both personally and in my

capacity as musician and sound engineer, put you, the end user,

first and that these products were only possible because of the

passion and the attention to detail that went into them.

Thank you for the confidence you have placed in us by

purchasing the UB mixing console. I should also like to thank all

those who, with their personal commitment and passion, have

helped me realize this impressive series of mixing consoles.

Kindest regards,

Uli Behringer