Edirol R-4 User Manual

 

Here’s how to record an audio source from a mic connected to the R-4’s combo input jack.

 

fig.mic-1.eps

 

●

 

Connect your mic to the 

 

.

If you’re monitoring through external speakers, acoustic feedback (a screech or whine) may occur, 
depending on the position of the mic relative to the speakers. If this occurs, take the following actions.

1. Point the mic in a different direction
2. Move the mic away from the speakers
3. Lower the monitoring volume

 

●

 

Set this to the 

 

 position.

 

●

 

If you’ve connected a phantom-powered condenser mic, turn this ON.

 

fig.input-analog.eps

 

●

 

Press the R-4's

 

.

In 

 

, set Input Select to 

 

.

Set the other items in 1 Recording Setup as appropriate for the 
recording you want to make.

 

●

 

Turn this ON if you want to prevent unexpectedly loud sounds or strong attacks from producing clipping 
noise.
The limiter threshold is -10 dB relative to digital full scale, and the compression ratio is 1:3.

Set to MIC

Turn this ON 

if you're using a 

condenser mic.

Adjust the 

input level

R-4_e.book 27 ページ ２００５年２月１０日　木曜日　午後３時３６分