Edirol FA-101 User Manual
22
Installing the driver (Windows)
In order to get the best performance from the software you are using, you must choose the correct device
settings. The FA-101’s audio driver supports WDM and ASIO 2.0.
settings. The FA-101’s audio driver supports WDM and ASIO 2.0.
Audio devices
Note 1: Refer to
MIDI devices
* For details on how to make settings for your software, you should also refer to the owner’s manual for your software,
* If you are unable to select the FA-101 in the device settings of your software, it is possible that the FA-101 driver
was not installed correctly. Please re-install the driver.
WDM
Use this if you are using the FA-101 with the following applications or situations.
• Conventional applications such as Media Player
• Conventional applications such as Media Player
• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications
• DirectSound compatible applications
ASIO
Use this if you are using the FA-101 with an ASIO-compatible application such as Cubase. In the ASIO settings
of your application, choose “EDIROL FA-101.” You will be able to use ten inputs and ten outputs.
of your application, choose “EDIROL FA-101.” You will be able to use ten inputs and ten outputs.
* To prevent audio loop feedback or double monitoring, turn monitoring off in your application, or set your
application to use ASIO Direct Monitor.
* When using the FA-101 with ASIO, we recommend that you not set your application to use the Microsoft GS
Wavetable SW Synth. (This will decrease the processing load, and make it easier to change the driver buffer size.)
How WDM ports correspond to FA-101 output jacks
Driver settings
About the input and output devices
Audio output device (WDM)
EDIROL FA-101 Out 1…5
Note 1
Audio input device (WDM)
EDIROL FA-101 In 1…5
Note 1
ASIO device
EDIROL FA-101
MIDI OUT
EDIROL FA-101 MIDI OUT
If you specify EDIROL FA-101 as the output port for your sequencer software, etc.,
messages will be sent from the FA-101’s MIDI OUT connector.
messages will be sent from the FA-101’s MIDI OUT connector.
MIDI IN
EDIROL FA-101 MIDI IN
If you specify EDIROL FA-101 as the input port for your sequencer software, etc.,
messages will be received from the FA-101’s MIDI IN connector.
messages will be received from the FA-101’s MIDI IN connector.
WDM output port
FA-101 output jacks
WDM input port
FA-101 input jacks
EDIROL FA-101 OUT 1
L
R
R
OUTPUT 1
OUTPUT 2
OUTPUT 2
EDIROL FA-101 IN 1
L
R
R
INPUT 1
INPUT 2
INPUT 2
EDIROL FA-101 OUT 2
L
R
R
OUTPUT 3
OUTPUT 4
OUTPUT 4
EDIROL FA-101 IN 2
L
R
R
INPUT 3
INPUT 4
INPUT 4
EDIROL FA-101 OUT 3
L
R
R
OUTPUT 5
OUTPUT 6
OUTPUT 6
EDIROL FA-101 IN 3
L
R
R
INPUT 5
INPUT 6
INPUT 6
EDIROL FA-101 OUT 4
* This port is not displayed
when operating at 192 kHz.
when operating at 192 kHz.
L
R
R
OUTPUT 7
OUTPUT 8
OUTPUT 8
EDIROL FA-101 IN 4
* This port is not displayed
when operating at 192 kHz.
when operating at 192 kHz.
L
R
R
INPUT 7
INPUT 8
INPUT 8
EDIROL FA-101 OUT 5
* This port is not displayed
when operating at 192 kHz.
when operating at 192 kHz.
L
R
R
OUTPUT 9
OUTPUT 10
OUTPUT 10
EDIROL FA-101 IN 5
* This port is not displayed
when operating at 192 kHz.
when operating at 192 kHz.
L
R
R
INPUT 9
INPUT 10
INPUT 10
FA-101_e.book 22 ページ ２００５年１１月２４日 木曜日 午後１時２５分