Edirol R-4Pro User Manual
38
Playing back
The following describes how to connect devices with digital input ports, such as mixers, speakers, or
recording devices.
recording devices.
fig.basic-disp.eps
The sampling frequency of the project playing back will be the
sampling frequency of the audio output from the digital output
connector.
sampling frequency of the audio output from the digital output
connector.
1.
Switch off the power to the R-4 Pro.
2.
Turn off power to the device with the digital input port.
3.
Connect the R-4 Pro digital output connector [DIGITAL OUT] to the digital
input connector of the device with digital input.
input connector of the device with digital input.
* You will need a separately available XLR type cable (not included) to connect your digital device to the R-4 Pro digital
output connector
.
4.
Switch on the R-4 Pro power.
5.
Turn on power to the device with the digital input port.
* You cannot adjust the volume of the R-4 Pro digital audio signal.
Connecting a device having a digital input port
(digital connection: R-4 Pro digital output connector)
(digital connection: R-4 Pro digital output connector)
R-4_e_new.book 38 ページ 2006年11月20日 月曜日 午後1時9分