Edirol R-4Pro User Manual
47
Finder functions
fig.finder-1.eps
1
While the Main screen is shown in the display, press the
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
[ENTER/FINDER] button. The Finder screen shown in
the figure is displayed.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2
In the Finder screen, use the [CURSOR] up/down
buttons or the [SCRUB] dial to select the copy source
project (the project you want to copy). Then press the
[ENTER] button.
buttons or the [SCRUB] dial to select the copy source
project (the project you want to copy). Then press the
[ENTER] button.
If the desired project is in a folder, the hard disk (HD), or the external memory device (EX), you
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder).
If you want to move back to the upper-level folder, press the [CURSOR] left button.
can press the [CURSOR] right button to move into the selected folder (i.e., move to a lower-
level folder).
If you want to move back to the upper-level folder, press the [CURSOR] left button.
fig.finder-cf.eps
* If you want to select the external memory device, select the hard disk
(HD) and then press the [CURSOR] left button to show the
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
external memory device (EX). However, if the external memory device
is not mounted, it will not be displayed. See Connection and
removal (p. 79)
* Press the [CURSOR] right button after selecting EX to reference
the external memory device contents.
fig.finder-copy1.eps
3
When the screen shown in the figure is displayed, use the
[CURSOR] buttons to select
[CURSOR] buttons to select
4 Copy
.
fig.finder-copy2.eps
4
Use the [CURSOR] up/down buttons or the [SCRUB/
VALUE] dial to select the copy destination folder (the
folder to which you want to copy the project). Then press
the [ENTER] button to execute the Copy operation. You
can also select
VALUE] dial to select the copy destination folder (the
folder to which you want to copy the project). Then press
the [ENTER] button to execute the Copy operation. You
can also select
HD
(hard disk) or
EX
(external memory
device) as the copy destination,.
* If you decide to cancel without copying, press the [EXIT] button.
fig.finder-copy3.eps
Do not turn off the power while a project is being copied.
* If the copy destination contains an identically named project, a number
such as -1 or -2 is appended to the name of the copied project.
Copying a project (Copy)
R-4_e_new.book 47 ページ ２００６年１１月２０日 月曜日 午後１時９分