Edirol V-4 User Manual

Switch the output channel

Try switching the channel that is being output to the V-4’s preview monitor. Press the preview 
select buttons (1 through 4 and OUTPUT) one after another, and verify that the image being output 
to your TV monitor changes accordingly.

Information about settings of V-4 is displayed to the Preview Monitor as below.

• If name of the effect is highlighted, this is the effect selected
• If * mark is displayed after effect name, the effect parameter can be changed with the control dial.
• If ball mark is displayed aside highlighted effect names, it means the effect parameter can be changed 

with the control dial.

You can add or reduce the information displayed on the preview monitor by changing the settings 
of the V-4 as described on P. 75 or later.

• [**Preset**] is displayed when position 1 of Memory Dial is selected. The 1st setting is fixed to the 

factory preset and cannot be changed.

• [*Protect On*] is displayed when Memory Protection is enabled. If this message appears, settings 

cannot be changed.

Selection of preview output

Current position and 
setting of Output Fader

Settings of 
channel B effects

Channel selection 
of video fader and 
input selection

Settings of 
BPM and TAP

Settings of 
channel A effects

Selection of
Transition Effect

Setting of 
Transformers