Edirol V-4 User Manual
89
MIDI implementation
Model:V-4 Version:1.000 Date:Dec.10.2002
Symbol
Meaning
Range
----------------------------------------------------------------------------------------------------------------------
n:
n:
MIDI channel
0H--FH (ch.1--ch.16)
vv:
control value, velocity value, etc.
00H--7FH (0--127)
only in the case of Note-on Velocity
01H--7FH (1--127)
kk:
note number
00H--7FH (0--127)
xx:
on/off switch
00H--3FH (0--63): OFF
40H--7FH (64--127): ON
40H--7FH (64--127): ON
----------------------------------------------------------------------------------------------------------------------
1. MIDI messages received at MIDI IN
*
If MIDI Thru is ON, MIDI messages received at MIDI IN will be retransmitted without
change from MIDI OUT.
change from MIDI OUT.
■
Channel voice messages
●
Note-on
Status
2nd byte
3rd byte
--------------------------------------------------------------------
9nH
9nH
kkH
vvH
*
Received only if Note Mode is ON.
*
The input of each channel is selected. Ignored if a non-selectable note message is
received.
received.
*
When Presentation mode is ON, the transition time will change according to the velocity
value (channel A only).
value (channel A only).
*
Inputs correspond to note numbers as follows.
---------------------------------------
Note No.
Note No.
Input
---------------------------------------
24H
24H
A Ch, 1
26H
A Ch, 2
28H
A Ch, 3
29H
A Ch, 4
---------------------------------------
2BH
2BH
B Ch, 1
2DH
B Ch, 2
2FH
B Ch, 3
30H
B Ch, 4
---------------------------------------
●
Control Change
*
By making settings in MIDI Setup, you can use these messages to control a wide variety
of things. The control changes that can be used are CC#1--5, 7--31, and 64--95. For details
on the factory settings, refer to “Settings Transmitted/Received Using MIDI” (p.95).
of things. The control changes that can be used are CC#1--5, 7--31, and 64--95. For details
on the factory settings, refer to “Settings Transmitted/Received Using MIDI” (p.95).
❍
Bank Select (controller numbers 0, 32)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
00H
mmH
BnH
20H
llH
mm, ll= bank number:00 00H - 7F 7FH(bank, 1 - bank, 16384)
*
Bank Select LSB will be ignored.
*
Processing of a Bank Select message is suspended until a subsequent Program Change is
received.
received.
*
If a non-selectable Bank Select is received, it will be ignored, and only the Program
Change will be received.
Change will be received.
*
Bank Select data that is received will be maintained until a subsequent Bank Select is
received.
received.
*
These messages select inputs for each channel, set memories, and specify how the sub-
channel is mixed in Presentation mode.
channel is mixed in Presentation mode.
Controls correspond to bank select messages as follows.
Bank Select
Program No.
Control
MSB/LSB
-------------------------------------------------------------------------------
50H/00H
-------------------------------------------------------------------------------
50H/00H
00H - 07H
MEMORY 1-8
-------------------------------------------------------------------------------
00H/00H
00H/00H
00H - 03H
A ch, INPUT 1-4
-------------------------------------------------------------------------------
01H/00H
01H/00H
00H - 03H
B ch, INPUT 1-4
❍
Modulation (controller number 1)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
01H
vvH
❍
Breath-type (controller number 2)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
02H
vvH
❍
Foot-type (controller number 4)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
04H
vvH
❍
Portamento Time (controller number 5)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
05H
vvH
❍
Volume (controller number 7)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
07H
vvH
❍
Balance (controller number 8)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
08H
vvH
❍
Panpot (controller number 10)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
0AH
vvH
❍
Expression (controller number 11)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
0BH
vvH
❍
Effect Control 1 (controller number 12)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
0CH
vvH
❍
Effect Control 2 (controller number 13)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
0DH
vvH
❍
General Purpose Controllers 1--4 (controller numbers 16-19)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
10H - 13H
vvH
❍
Hold 1 (controller number 64)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
40H
xxH
❍
Portamento (controller number 65)
Status
2nd byte
3rd byte
--------------------------------------------------------------------
BnH
BnH
41H
xxH
❍
Sostenuto (controller number 66)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
42H
xxH
❍
Soft (controller number 67)
Status
2nd byte
3rd byte
---------------------------------------------------------------------
BnH
BnH
43H
xxH