Edirol UA-1000 User Manual
23
Preparations for using the UA-1000
Driver settings
About the input/output devices
In order to obtain the best performance from the software you are using, you must specify the correct audio and MIDI
input/output destinations.
input/output destinations.
The audio driver supports WDM/ASIO2.0/MME.
Audio device
MIDI device
If you are unable to select the UA-1000 device in the device settings of your software, it is
possible that the UA-1000 driver was not installed correctly. Please reinstall the driver.
possible that the UA-1000 driver was not installed correctly. Please reinstall the driver.
WDM
Use this for the following applications or purposes.
• Conventional applications such as Media Player
(For details on settings, refer to “Settings when using the Windows Media Player”).
• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications
• Playing back WMA Professional format 5.1 channel files in Media Player
(In “Control Panel” -> “Sounds and Audio Devices” -> “Audio” tab -> “Advanced” button in “Sound playback” ->
“Speaker setup,” select “5.1 surround sound speakers”)
(For details on settings, refer to “Settings when using the Windows Media Player”).
• WDM driver mode compatible applications such as SONAR
• DirectSound compatible applications
• Playing back WMA Professional format 5.1 channel files in Media Player
(In “Control Panel” -> “Sounds and Audio Devices” -> “Audio” tab -> “Advanced” button in “Sound playback” ->
“Speaker setup,” select “5.1 surround sound speakers”)
* Stereo audio signals will be input and output from WAVE OUT 1-2 and WAVE IN 1-2. In other cases, use “MME.”
ASIO
Use this when using the UA-1000 with an ASIO-compatible application such as Cubase.
In the ASIO settings of your application, select “EDIROL UA-1000.” You will be able to use 12 inputs and 10 outputs.
In the ASIO settings of your application, select “EDIROL UA-1000.” You will be able to use 12 inputs and 10 outputs.
* To prevent audio loops or double monitoring, turn off monitoring in your application or select “Use ASIO Direct Monitor.”
* When using the UA-1000 with ASIO, we recommend that you set your application so that it does not use the Microsoft GS Wavetable
* When using the UA-1000 with ASIO, we recommend that you set your application so that it does not use the Microsoft GS Wavetable
SW Synth. (In order to decrease the load, and for convenience when changing the driver buffer size)
MME
Normally you should use WDM or ASIO.
Use this in the following cases when using an application that does not support WDM driver mode or ASIO (e.g., Cool Edit).
• Recording or playing 24-bit data
• Using something other than the UA-1000’s WAVE OUT 1-2 and WAVE IN 1-2
Use this in the following cases when using an application that does not support WDM driver mode or ASIO (e.g., Cool Edit).
• Recording or playing 24-bit data
• Using something other than the UA-1000’s WAVE OUT 1-2 and WAVE IN 1-2
Audio output device
EDIROL UA-1000
WDM
MME EDIROL UA-1000 1-2 Out
:
MME EDIROL UA-1000 9-10 Out
:
MME EDIROL UA-1000 9-10 Out
MME
Audio input device
EDIROL UA-1000
WDM
MME EDIROL UA-1000 1-2 In
:
MME EDIROL UA-1000 9-10 In
MME EDIROL UA-1000 Mon
:
MME EDIROL UA-1000 9-10 In
MME EDIROL UA-1000 Mon
MME
ASIO audio device
EDIROL UA-1000
ASIO
MIDI OUT device
EDIROL UA-1000
If you specify UA-1000 MIDI OUT as the output port for your sequencer software,
messages will be transmitted from the MIDI OUT connector of the UA-1000 itself.
messages will be transmitted from the MIDI OUT connector of the UA-1000 itself.
MIDI IN device
EDIROL UA-1000
If you specify UA-1000 MIDI IN as the input port for your sequencer software, mes-
sages will be input from the UA-1000’s MIDI IN connector.
sages will be input from the UA-1000’s MIDI IN connector.
UA-1000_e.book 23 ページ ２００３年８月６日 水曜日 午前１１時５２分