Edirol UA-1000 User Manual
39
Various settings
Reading and writing memories
Five sets of UA-1000 settings can be stored within the UA-1000 itself. These stored memories can be read and
written from UA-1000 Control Panel.
written from UA-1000 Control Panel.
For the procedure, refer to README_E.HTM on the included CD-ROM.
Convenient ways to use the OUTPUT PATCH BAY
You can store two different settings for the OUTPUT PATCH BAY, and switch between these two settings.
DIRECT MONITOR: ON
fig.monitor-on
If even one
INPUT MONITOR (DIRECT MONITOR)
switch is
ON
,
the
DIRECT MONITOR: ON
settings of the
OUTPUT PATCH BAY
will be used.
* These settings will always be used if the
Direct Monitor Soft Control switch
of the UA-1000’s front panel is
turned off
.
DIRECT MONITOR: OFF
fig.monitor-off
If all of the
INPUT MONITOR (DIRECT MONITOR)
switches are
OFF
, the
DIRECT MONITOR: OFF
settings of the
OUTPUT PATCH
BAY
will be used.
Examples of use
Simply by switching INPUT MONITOR (DIRECT MONITOR) on/off, you can switch between settings for
monitoring and settings for mastering.
monitoring and settings for mastering.
fig.output-monitor
Settings for monitoring
These settings are appropriate when you
want to hear the sounds being input to the
UA-1000 from the input jacks.
want to hear the sounds being input to the
UA-1000 from the input jacks.
fig.output-monitor2
Settings for mastering
These settings are appropriate when you
have finished acquiring audio from the
input jacks, and are mastering the data on
your computer.
have finished acquiring audio from the
input jacks, and are mastering the data on
your computer.
UA-1000_e.book 39 ページ ２００３年８月６日 水曜日 午前１１時５２分