Edirol UA-1000 User Manual

 

fig.int-blockB

 

■

 

Turn this switch on if you want the UA-1000 to synchronize to the word clock from an external digital device 
or to the digital signal being input from the digital input jack. If synchronization is occurring correctly, the 
external clock switch will light, and the UA-1000 will be in external clock mode.

If you are synchronizing to the digital signal or recording it, you must turn on the external clock switch.

If the external clock switch is blinking, synchronization has not been achieved. The UA-1000 will not be able 
to record or play back correctly. Please check the settings of the connected equipment.

 

• The word clock from the connected digital device or the digital signal from the digital input jack is 

not being received correctly

• The sampling frequency does not match the setting of the sampling frequency select switch.

 

If the word clock input connector and the digital input connector are both connected, the word clock input 
connector will take priority.

If the UA-1000 is synchronized to the word clock, the digital device connected to the digital input jack must 
also be synchronized to the word clock.

If the digital device connected to the digital input is not synchronized to the word clock, the digital 
input and digital output will not operate correctly.

Input jacks

(phone)

Output digital 

input jack

Output jacks 

(phone)

Optical digital 

output jack

Headphone

jack

Direct monitor 

volume 

(front panel)

main output signal

Output volume knob

(front panel)

UA-1000_e.book 43 ページ ２００３年８月６日　水曜日　午前１１時５２分