Roland 5100009796-02 User Manual
47
Performing (Play Mode)
You can mute all controllers so that MIDI messages will not be transmitted when
you move a controller.
you move a controller.
This is useful in situations such as when a parameter value is far
away from the position of the controller; you can use the [PRM
MUTE] button to mute the controller, and then move the
controller near the parameter value to match the knob position
with the parameter value before you perform.
away from the position of the controller; you can use the [PRM
MUTE] button to mute the controller, and then move the
controller near the parameter value to match the knob position
with the parameter value before you perform.
1
Press the [
] [
] buttons simultaneously.
The “PRM MUTE” cursor will light in the display.
2
Operate a controller.
MIDI messages will not be transmitted even when you operate a controller.
3
Once again, press the [
] [
] buttons simultaneously.
The “PRM MUTE” cursor in the display will go dark.
Now MIDI messages will once again be transmitted when you move a controller.
Now MIDI messages will once again be transmitted when you move a controller.
Muting the Controller Values (PRM MUTE)
PRM MUTE
A-300_500_800C_e.book 47 ページ ２０１０年２月２２日 月曜日 午後９時１３分