Roland 2 User Manual
44
Other added functions
You can receive program change messages to switch divisions
of the Style, or cause program change messages to be
transmitted when you switch divisions of the Style.
of the Style, or cause program change messages to be
transmitted when you switch divisions of the Style.
You can also receive chord input from an external MIDI
keyboard.
keyboard.
1. Press [MENU].
2. Press [ENTER].
3. Use [
] [
] to select the SYSTEM STYLE MIDI screen,
and use [
] [
] to select the parameter that you want
to edit.
4. Turn the VALUE dial to edit the value.
5. When you’re finished making system settings, press [EXIT].
How program changes correspond to a Style’s
divisions
divisions
Immediately after using Style PC to specify a FILL, you should
then specify the division that you want to play following the fill-
in.
then specify the division that you want to play following the fill-
in.
SYSTEM STYLE MIDI (NTA)
Parameter
Value
Explanation
TX Style PC
Tx Style PC
Channel
Channel
1–16
Specifies the transmit channel
for the program changes
transmitted when you switch
between divisions of the Style.
for the program changes
transmitted when you switch
between divisions of the Style.
Tx Style PC
Switch
Switch
OFF, ON
Specifies whether program
changes will be transmitted
when you switch between
divisions of the Style.
changes will be transmitted
when you switch between
divisions of the Style.
Rx Style PC
Rx Style PC
Channel
Channel
1–16
Specifies the receive channel for
program changes from an
external device that will switch
between divisions of the Style.
program changes from an
external device that will switch
between divisions of the Style.
Rx Style PC
Switch
Switch
OFF, ON
Specifies whether program
changes will be received to
switch between divisions of the
Style.
changes will be received to
switch between divisions of the
Style.
NTA (see below)
Rx NTA
Channel
Channel
1–16
Specifies the NTA receive
channel.
channel.
RX NTA
Switch
Switch
OFF, ON
Specifies whether NTA will be
received.
received.
What is NTA?
This stands for “Notes To Arranger.” The notes you play
on the keyboard of the Prelude are sent together with
chord information to the arranger. These notes can also
be received via MIDI from an external MIDI keyboard
controller or other device. If you want to use the arranger
without playing the Prelude’s keyboard, turn this setting
“ON,” and transmit the note messages from your
computer or an external MIDI device to the Prelude.
on the keyboard of the Prelude are sent together with
chord information to the arranger. These notes can also
be received via MIDI from an external MIDI keyboard
controller or other device. If you want to use the arranger
without playing the Prelude’s keyboard, turn this setting
“ON,” and transmit the note messages from your
computer or an external MIDI device to the Prelude.
Division
Program change
INTRO
1
67
2
68
3
65
4
66
MAIN
1
1
2
2
3
9
4
10
FILL
1
97
2
89
3
90
4
98
ENDING
1
75
2
76
3
73
4
74
Prelude_OM_Ver2.book Page 44 Wednesday, September 9, 2009 5:38 PM