Roland XV-88 User Manual
223
Quick Reference of Procedures
Appendices
Controller Settings
Modifying Rhythm Set
Settings
(basic procedure)
Settings
(basic procedure)
1. Turn on the [EDIT] indicator.
2. Use the function buttons to select the display group.
3. Use
/
to select the desired setting page.
4. Use the keyboard to choose a Rhythm Tone (percussion
sound).
5. Use
/
to select a Parameter.
6. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to modify the value.
Changing the Rhythm
Set Assigned to a
Performance Part
Set Assigned to a
Performance Part
1. Press [PERFORM] + [PATCH].
2. Use
/
to select a Part.
3. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to choose the Rhythm Set.
The rest procedure is the same as for the basic procedure listed
above.
above.
Adjusting the Volume of
Rhythm Sets
Rhythm Sets
Level parameter (RHYTHM/COMMON/RHYTHM
COMMON)
COMMON)
Changing the Range of
the Pitch Bend Lever
(for each Patch)
the Pitch Bend Lever
(for each Patch)
Bend Range parameter (PATCH/CONTROL/TMT
CTRL&BENDER)
CTRL&BENDER)
Selecting the MIDI
Messages Controlled by
the C1–C4 Sliders
Messages Controlled by
the C1–C4 Sliders
Assign parameters (SYSTEM/CONTROL/C1–C4 ASSIGN)
Selecting the MIDI
Messages Controlled by
the Control Pedal
Messages Controlled by
the Control Pedal
Assign parameter (SYSTEM/CONTROL/CONTROL PEDAL
1, 2)
1, 2)
Reversing the Polarity of
Control Pedal (when
using a pedal of another
manufacturer whose
polarity is reversed)
Control Pedal (when
using a pedal of another
manufacturer whose
polarity is reversed)
Polarity parameter (SYSTEM/CONTROL/CONTROL PEDAL
1, 2)
1, 2)
Selecting the MIDI
Messages Controlled by
the D Beam Controller
Messages Controlled by
the D Beam Controller
In Performance Mode
Assign parameter (ZONE/D BEAM/D BEAM CONTROL)
In Patch/Rhythm Set Mode
Assign parameter (SYSTEM/D BEAM/D BEAM CONTROL)