Roland XV-88 User Manual

If you’ve made a mistake in setting a parameter value, or 
you have second thoughts about the changes, press 
[UNDO/COMPARE] to restore the value to what it was.

8. If you wish to move to another display group, press 

[EDIT] to make the indicator light, and use the function 
buttons.

You can also move to another display group by holding 
down [SHIFT] and using

or

. Since this can be 

done even when the [EDIT] indicator is dark, it is a faster 
way to get around because you don’t have to turn on the 
[EDIT] indicator each time.

9. Repeat steps 3–8 to complete a Patch.

10. When you finish making settings, press [EXIT] or 

[PATCH] to return to the PATCH PLAY page.

An asterisk 

 will be displayed at the left of the Patch 

group. This shows patch settings have been modified.

If you select another Patch in the group with an asterisk 

, the modified Patch settings will be lost. To keep these 

fig.05-03

When modifying Tone settings for a Patch, the values for 
four Tones will be displayed together on a single display. 
This is called the 

. Use it when you want to 

modify parameter values as you compare the settings of the 
four Tones.

1. When modifying a Tone, use

or

to move the 

cursor to the parameter you wish to modify.

2. Press [PALETTE EDIT] to call up the Palette page.

fig.05-04

3. Press TONE SELECT [1]–[4],

or

to choose the 

Tone to modify.

The button indicator for the selected Tone will light, and 
the Tone number and Wave name appear in the display.

For modifying the same parameter of two or more Tones 
simultaneously, hold down one of the TONE SELECT 
[1]–[4] buttons and press another.

4. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric 

keys to change the parameter value.

If you’ve selected two or more Tones, your editing will 
modify the parameter values for all selected Tones by the 
same amount. If you want to set all selected Tones to the 
same value, select the Tone having that value by 
pressing

or

, and while holding down [SHIFT], 

press [ENTER].

If you’ve made a mistake in setting a parameter value, or 
you have second thoughts about the changes, press 
[UNDO/COMPARE] to restore the value to what it was.

5. If you wish to edit other parameters, 

press

or

to select the parameter that you wish 

to edit.

6. Repeat steps 3–5 to complete a Patch.

7. To exit the Palette page, press [PALETTE EDIT], thus 

extinguishing the button’s indicator.