Technics sx-PR604/M User Manual
Loading data
Recall (load) the data from the disk to this instrument’s memories.
• Note that the load procedure causes any data which is currently stored in the relevant memories to be erased.
• Note that the load procedure causes any data which is currently stored in the relevant memories to be erased.
LOAD
Load data that saved to a disk into this instrument’s memory.
1.
Insert the disk with the stored data into the
Disk Drive. Push it all the way in until you hear
a click.
Disk Drive. Push it all the way in until you hear
a click.
2.
On the DISK MENU display, select LOAD.
• The display looks similar to the following.
• If there are only SMF files on the disk, the display auto-
matically changes to the SMF LOAD display.
3.
Use the buttons below the display to select
the file (Technics file) you wish to load.
the file (Technics file) you wish to load.
• If there are SMF files on the disk and you wish to load
an SMF file, press the SMF button. (Refer to page 97.)
4.
Press the LOAD button.
• The LOAD operation begins.
• When the operation has been successfully completed,
“COMPLETED!” is shown on the display.
• If song data was loaded, you can press the START/STOP
button to begin playback when the SEQUENCER PLAY
display is active.
display is active.
• You can also access the LOAD display by pressing the
DISK button for a few seconds.
LOAD OPTION
Specify the kind of data you wish to load from the disk to
your instrument.
your instrument.
1.
Use the PAGE buttons to access the PAGE
2/3 LOAD OPTION display.
2/3 LOAD OPTION display.
• The display looks similar to the following.
2.
Use the buttons below the display to specify
the types of data you wish to load (YES/NO).
the types of data you wish to load (YES/NO).
• - - - - - indicates that this type of data has not been saved.
• This setting is canceled when you quit the LOAD display
or when another file is selected.
3.
Press the LOAD button.
• The LOAD operation begins.
SINGLE LOAD
You can specify which data to load from a disk into a specific
PANEL MEMORY, COMPOSER (MEMORY), SOUND
MEMORY, EFFECT MEMORY or SEQUENCER (when
SONG SAVE was executed) memory.
PANEL MEMORY, COMPOSER (MEMORY), SOUND
MEMORY, EFFECT MEMORY or SEQUENCER (when
SONG SAVE was executed) memory.
1.
Use the PAGE buttons to access the PAGE
3/3 SINGLE LOAD display.
3/3 SINGLE LOAD display.
• The display looks similar to the following.
2.
Use the MODE button to select the data you
wish to load.
wish to load.
3.
Use the BANK/SINGLE button to select the
load increment (except for SEQUENCER).
load increment (except for SEQUENCER).
BANK: Load one bank at a time.
SINGLE: Load the smallest data increment.
SINGLE: Load the smallest data increment.
4.
Follow the appropriate procedure to load the
specified data.
specified data.
• Specify the data source (left side), and the data destina-
tion (this instrument’s memory location) for TO.
Di
sk Dr
iv
e
Part VI
Disk Drive
96
QQTG0665