Roland 5100001499 User Manual
57
Using the Registration Buttons
Using the Registration Buttons
Procedure for Creating Registration Sets
Prepare the Registrations
A convenient way to make the sequence of Registration buttons to be pressed
easy to understand is to store the panel settings starting from the Registration
[1] button, continuing with subsequent buttons in accordance with the
progression of the song.
easy to understand is to store the panel settings starting from the Registration
[1] button, continuing with subsequent buttons in accordance with the
progression of the song.
Save the Registrations to the USB memory or User memory
If you want to use more than four Registrations in a song, save the settings for
Registration buttons [1]–[4] to a USB memory or User memory as a set, then
continue to store further panel settings again, starting from Registration button
[1]. Save all of the Registration sets you have set to the USB memory or User
memory.
Registration buttons [1]–[4] to a USB memory or User memory as a set, then
continue to store further panel settings again, starting from Registration button
[1]. Save all of the Registration sets you have set to the USB memory or User
memory.
Arrange the Registrations in the sequence they are to be used
Save the Registration sets to the USB memory or User memory in the order they
are to be used in the song.
are to be used in the song.
Using Registration Sets
Call up the Registration sets saved on the USB memory to the ATELIER
Insert the USB memory containing the saved Registration sets into the External
Memory connector, and read the Registration sets into the ATELIER.
Memory connector, and read the Registration sets into the ATELIER.
Switch the Registration sets as you perform
Press the Registration buttons to switch Registrations as you play the song.
If you want to recall the next Registration set, assign the foot switch to “RIGHT
+ Load Next” and recall the next Registration set (p. 71).
If you want to recall the next Registration set, assign the foot switch to “RIGHT
+ Load Next” and recall the next Registration set (p. 71).
1.
Make all the panel settings that you wish to store.
2.
While holding down the [Write] button, press one of the
Registration [1]–[4] buttons.
Registration [1]–[4] buttons.
The panel settings will be stored in the selected Registration button.
Storing Registrations
For details on the settings that
are stored in a Registration,
refer to “Settings That Are
Stored In the Registration
Buttons” (p. 130).
are stored in a Registration,
refer to “Settings That Are
Stored In the Registration
Buttons” (p. 130).
AT-75_e.book 57 ページ ２００８年８月２１日 木曜日 午前１０時９分