Roland 5100001499 User Manual

Page of 144
 
84
 
Record and Playback Your Performance
 
The indicators for Track button in which performances were 
recorded will be lit. By turning off these Track button 
indicators, you can temporarily silence the sound. This is 
referred to as “Track Mute.”
If you want to play back a song from USB memory, connect 
your USB memory to the External Memory connector before 
you continue.
If you want to play back a song from floppy disk, connect your 
floppy disk drive to the External Memory connector, and insert 
the floppy disk.
 
1.
 
Press the Track buttons whose indicator is lit to 
turn the light off.
 
The track whose indicator was turned off will be muted 
(silenced).
 
2.
 
Press the Track buttons once again (indicator 
lights).
 
The part that had been muted will return to normal and 
will be heard.
 
Assignments to the Track Buttons When 
Playing Back Commercial SMF Music Files
 
You can also change the Track Mute Settings in the Utility 
menu (p. 106). You can individually mute the Rhythm track 
and accompaniment track as well as the Upper Track and 
Solo Track. You can also mute the Control Track (for the 
expression pedal and panel controls) (p. 106).
 
You can record the performance that you play. You can also 
record your performance while playing Rhythms or Automatic 
Accompaniment.
 
fig.07-12.eps
 
1.
 
Select the panel settings needed for recording 
the performance.
 
2.
 
Enter the recording standby mode by pressing 
the [Rec] button.
 
The [Rec] button indicator will light, and the [Play/Stop] 
button will blink.
 
3.
 
Press the [Play/Stop] button to start recording.
 
When you press the [Play/Stop] button, the metronome 
will sound a two-measure count, and then recording will 
begin.
 
If you wish to use Rhythm and Automatic Accompaniment as 
you record, press the [Start/Stop] button (p. 43) instead of 
the [Play/Stop] button to begin recording. Also, if the Sync 
Start is ON, recording will begin the instant you play the 
Lower keyboard.
 
4.
 
Press the [Play/Stop] button when you have 
completed your recording.
 
The Track indicator where a performance song is 
recorded will light.
When you press the [Intro/Ending] button or [Start/Stop] 
button while recording a Rhythm performance or 
Automatic Accompaniment, the Rhythm performance 
and Automatic Accompaniment will stop. However, the 
recording itself will continue. Press the [Play/Stop] 
button to stop recording.
 
The Play and Stop functions can both be assigned to one of 
the foot switches located on each side of the Expression 
Pedal (p. 70).
 
Silencing a Specific Track 
(Track Mute)
 
Button
Channel
[Bass]
 
2
 
[Lower]
 
3
 
[Solo/Upper]
 
1, 4
 
Recording a Performance
2
3, 4
AT-75_e.book 84 ページ 2008年8月21日 木曜日 午前10時9分