Roland AT-500 User Manual

 

Using the Registration Buttons

 

Using the Registration Buttons

 

With the settings of Registration buttons [1]–[8] considered as one set, you 
can store the Registration set to USB memory or User memory. We 
recommend that complex panel settings or Registrations you wish to keep be 
saved on USB memory. Furthermore, when you save Registrations created on 
the ATELIER to USB memory, you can call up their settings on other ATELIER 
Series instruments and use the Registrations the same way.

 

If you want to save Registration data to a floppy disk, connect the floppy disk 
drive to the Ext Drive connector.

Into the floppy disk drive, insert a floppy disk that was formatted by the 
ATELIER.

 

The Registration Load screen appears.

 

fig.03-09-3.eps

 

The Registration Save screen appears.

 

fig.03-09.eps

 

If you want to save the Registration to User memory, select “User.”
If you want to save the Registration to USB memory, select “Ext Memory.”
If you want to save the Registration to floppy disk, select “Disk.”

You can also open the 
Registration Load screen by 
pressing the [Registration] 
button on the panel.

If you wish to assign a name 
before you save, refer to 
“Assigning a Name to a 
Registration Set” (p. 101). 

AT-500_e.book 103 ページ ２００８年７月２８日　月曜日　午後４時１７分