Roland AT-500 User Manual

Page of 272
 
212
 
Various Other Settings
 
You can specify the Program Change number that will be 
transmitted from MIDI Out connector when a Registration is 
selected.
 
1.
 
Touch <System> on the Main screen.
 
The System screen appears.
 
2.
 
Touch <
> <
> to display the Bank MSB 
(Bank Select MSB), Bank LSB (Bank Select LSB), 
or PC Number (Program Change Number).
 
fig.00-37.eps
 
3.
 
Touch either <Bank MSB>, <Bank LSB>, or <PC 
Number> setting.
 
fig.09-28.eps
 
4.
 
Touch <
> <
> to change the setting.
 
5.
 
Touch <Exit>.
 
This instrument contains two sound generators: one for GM2/
GS data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control 
only the sound generator for GM2/GS data playback. 
However by changing the MIDI IN Mode setting, you can also 
control the keyboard sound generator from MIDI In.
 
1.
 
Touch <System> on the Main screen.
 
The System screen appears.
 
2.
 
Touch <
> <
> to display the MIDI IN Mode.
 
fig.09-24.eps
 
3.
 
Touch the MIDI IN Mode setting to switch 
between “MODE 1” and “MODE 2.”
 
Each time you touch the MIDI IN Mode setting, it will 
alternate between “Mode 1” and “Mode 2.”
 
Setting the PC Number
 
Menu
Setting
Bank MSB
 
0–127
 
Bank LSB
 
0–127
 
PC Number
 
1–128
 
MIDI IN Mode
 
Setting
Description
MODE 1
 
Control the instrument as a GS sound generator
 
MODE 2
 
Channels 5 through 10 and Channels 12, 14, 15 
are transmitted to the GS sound generator, and all 
other channels are transmitted to the keyboard 
sound generator.
 
Channel
MODE 1
MODE 2
 
1
GS
Solo
2
GS
Pedal/GS *
3
GS
Lower
4
GS
Upper
5–10
GS
GS
11
GS
Drums/SFX
12
GS
GS
13
GS
Manual Percussion
14–15
GS
GS
16
GS
Control
AT-500_e.book 212 ページ 2008年7月28日 月曜日 午後4時17分