Roland AT-500 User Manual

 

Before You Start Playing

 

941

 

Once the connections have been completed, turn on or off 
power to your various devices in the order specified. By 
turning on or off devices in the wrong order, you risk 
causing malfunction and/or damage to speakers and other 
devices.

 

• Is the power cord correctly connected to the AC inlet?

• Is the power cord correctly connected to the AC outlet?

• Is the [Master Volume] slider (located at the left of the 

Lower Keyboard) set to the Min (minimum) position?

 

fig.00-26.eps

 

fig. 00-27.eps, fig.00-27-3.eps

 

The main screen will appear in the display.

 

942

 

This unit is equipped with a protection circuit. A brief 
interval (a few seconds) after power up is required before 
the unit will operate normally.

 

Now adjust the [Master Volume] slider to a suitable 
level. The volume will be increased when the Expression 
Pedal is pressed down, and decreased when the pedal 
is returned.

 

fig.00-28.eps

 

fig. 00-27.eps,fig.00-27-2.eps

 

945

 

If you need to turn off the power completely, first turn off the 
[Power On] switch, then unplug the power cord from the 
power outlet. Refer to “Power Supply” (p. 6).

AT-500_e.book 22 ページ ２００８年７月２８日　月曜日　午後４時１７分