Roland AT900C User Manual

 

Before You Start Playing

 

Once the connections have been completed, turn on or off 
power to your various devices in the order specified. By 
turning on or off devices in the wrong order, you risk 
causing malfunction and/or damage to speakers and other 
devices.

 

• Is the power cord correctly connected to the AC inlet?

• Is the power cord correctly connected to the AC outlet?

• Is the [Master Volume] slider (located at the left of the 

Lower Keyboard) set to the Min (minimum) position?

 

fig.00-26.eps

 

fig. 00-27.eps, fig.00-27-3.eps

 

The main screen will appear in the display.

 

This unit is equipped with a protection circuit. A brief 
interval (a few seconds) after power up is required before 
the unit will operate normally.

 

Now adjust the [Master Volume] slider to a suitable 
level. The volume will be increased when the Expression 
Pedal is pressed down, and decreased when the pedal 
is returned.

 

fig.00-28.eps

 

fig. 00-27.eps,fig.00-27-2.eps

 

If you need to turn off the power completely, first turn off the 
POWER switch, then unplug the power cord from the power 
outlet. Refer to [Power Supply] (p. 6).

ON

Lower position

OFF

Upper position

AT-900_e.book 24 ページ ２００７年９月７日　金曜日　午前８時４３分