Roland V-Piano User Manual

 

Panel descriptions

 

 

 

This is used when updating the V-Piano’s internal operating 

program.

 

Do not connect anything to this connector during normal use.

 

This is a coaxial type digital output jack. This will digitally output the 

same audio as is output from the OUTPUT A jacks.

It complies with the S/PDIF format, and outputs a digital audio 

signal (stereo).

* The [VOLUME] Knob will not adjust the volume of this connector. 

Use the controls of your input device to adjust the volume.

* S/PDIF is a digital interface format that is used by consumer digital 

audio equipment.

 

When you want to use the included editor, use a USB cable to 

 

 

 

Connect separately sold pedals or switches here.

A variety of functions can be assigned to pedals connected to the 

 

Connect these to external MIDI devices to transmit or receive MIDI 

messages.

 

These are audio signal input jacks. You can connect an external 

audio playback device here, and output its sound mixed with the 

sound of the V-Piano.

* You cannot adjust the input level of these jacks, nor the balance 

between these inputs and the V-Piano’s output.

 

These are audio signal output jacks. The signal to be output from 

You can use these jacks in conjunction with the OUTPUT A jacks to 

output the V-Piano’s sound as four-channel output.

The phone jack and XLR connectors output the same signal.

 

These are the main audio signal output jacks.

The phone jacks and XLR connectors output the same signal.

 

Rear panel

This instrument is equipped with balanced (XLR) type jacks. 

These jacks are wired as shown below. Make connections after 

first checking the wiring diagrams of other equipment you 

intend to connect.

fig.XLRTRSJack.eps

If you connect a phone plug to only the L/1 (and L/3) phone 

jacks, they will output a mono signal that mixes-in the R/2 (and 

R/4) signals, allowing you to use these as mono outputs.

* The XLR connectors will output a stereo signal.

* The V-Piano is designed to be used with stereo output. The 

sound quality and tonal character will be affected if you use 

monaural output.

V-Piano_e.book 14 ページ ２００９年１月２８日　水曜日　午前９時１０分