Yamaha Bass Effects Processor User Manual
12
■ Try out some of the other patches
The MAGICSTOMP has a total of 198 patches. 99 of those are User Patches (U01 – U99) to which
you can save (overwrite) data of patches that you have created. The other 99 are Preset Patches
(P01 – P99) which can not be overwritten with new data. You can however, edit the Preset Patches
and save them in the User Patch section.
you can save (overwrite) data of patches that you have created. The other 99 are Preset Patches
(P01 – P99) which can not be overwritten with new data. You can however, edit the Preset Patches
and save them in the User Patch section.
* When shipped from the factory, the MAGICSTOMP’s User Patch section contains the same data as found in the
Preset Patches.
● Two ways to select patches
When the MAGICSTOMP is shipped from the factory, its [UP/DOWN MODE] is already set for the
patch selection mode. In this mode, just press the + switch to move to the next greater patch number,
and press the – switch to move to the next lesser patch number. Hold either switch down and the
patch numbers will quickly cycle up or down in order.
In this mode, the ON/OFF switch is used to switch the patch (effect) on or off.
patch selection mode. In this mode, just press the + switch to move to the next greater patch number,
and press the – switch to move to the next lesser patch number. Hold either switch down and the
patch numbers will quickly cycle up or down in order.
In this mode, the ON/OFF switch is used to switch the patch (effect) on or off.
Using the MAGICSTOMP
U99¤MAGICSTOMP
ó‡GAINfiMSTRáTONE
ó‡GAINfiMSTRáTONE
Patch No.
The MAGICSTOMP comes loaded with a variety of effect patches (programmed effects).
First, give some of the presets a try and see what’s available.
First, give some of the presets a try and see what’s available.
■ Turn on the amplifier and play
You’ll hear the currently selected patch.
Use the MAGICSTOMP’s VOLUME knob to adjust the MAGICSTOMP’s output volume.
Use the MAGICSTOMP’s VOLUME knob to adjust the MAGICSTOMP’s output volume.
Patch Name
U01¤DIST
ó‡GAINfiMSTRáTONE
ó‡GAINfiMSTRáTONE
U01¤DIST
ó
ó
EFFECT OFF
U98
P02
U01
U99
P01
U99
P01
P99
P98
P97
P99
U02
U03
U04
U01¤DIST
ó‡BAL0fiSTERáVOL
ó‡BAL0fiSTERáVOL
Effect ON
Effect OFF
Pressing the – switch decreases
the patch number by 1
the patch number by 1
Pressing the + switch increases
the patch number by 1
the patch number by 1