Panasonic NC-24C Leaflet

www.panasonic.ca

Power and 

Transmission

3 Slot Midspan 

Chassis

NC-24C

- Exceeds IEEE 802.3af Power over Ethernet standards

- Supports data links at 10Mbps, 100Mbps or 1000Mbps

- 8 port modular card provides output wattage up to 18 Watts on 

  all ports simultaneously as needed

- 4 port high wattage modular card provides output wattage up to 

  36 Watts on all ports simultaneously as needed

- Chassis allows for Hot-Swapping of modules

- Use either modular card (NC-8POE or NC-4HP) or any combination

- Over voltage current and short protection

- Each individual module port is micro fused

- Removable power cord w/IEC-320-C7 connector

- Data and power carried on the same Ethernet cable

- 19” rack mount kit included with 1 slot chassis

- Includes full 3 year warranty

The NC-24C 3 slot midspan chassis 

can be used in conjunction with 

either of the COBRA modular cards

(NC-8POE or NC-4HP) to 

automatically provide additional 

power to a nework cable for power

over Ethernet (PoE) devices such 

as an IP camera , and is used when 

The device acts as much like a patch

panel and adds  ~48VDC to unused

(non-data) wires in a standard 

category 5, 5e, 6, or 6a Ethernet 

cable. The NC-24C provides power 

to the COBRA modular card (NC-8POE)

or NC-4HP) over single standard

Ethernet cable to a PoE enabled 

End device  designed to receive  both

Data and Power throughits RJ45

connector.

The NC-24C is easy to maintain, and 

with its hot swappable modules, 

without interuptions to the network

Shown with 3 x NC-8POE

modular cards installed