Manualsbrain.com
  1. Manuals
  2. Brands
  3. Roland
  4. FC-300
  5. User Manual

Roland FC-300 User Manual

Download
Page of 72
 
54
 
Other Features
 
2
 
Press VALUE [
] [
] to make the setting.
 
3
 
Press [WRITE].
 
The “Now Sending...” message appears in the display when the FC-300 sends the 
data. The top screen appears in the display when the FC-300 finishes sending the 
data.
If either ALL, CONTROL, or PATCH is selected in Step 2, the message “Erase Tmp 
Data Sure?” is displayed.
Press [WRITE] again; the data currently being edited (unsaved) in Control Change 
mode and Patch mode is erased, and then the bulk dump begins.
FC-300 can receive the setting saved in the sequencer or the other FC-300 with 
identical settings.
 
Making the Connections
 
• When receiving data saved to a MIDI sequencer
Connect the MIDI sequencer’s MIDI OUT to the FC-300’s MIDI IN connector 
with a MIDI cable.
 
Transmitting
 
1
 
Press PARAMETER [
] [
] to select “Bulk Load.”
 
2
 
Transmit the data.
 
The “Now Receiving...” message appears in the display when the FC-300 receiving 
the data.
The bulk load processing ended when the message “Now Waiting...” appears in the 
display.
 
3
 
When you’ve finished receiving the data, press [UTILITY] or [EXIT].
 
The data is saved, and the FC-300 returns to the top screen.
 
Value
Explanation
 
ALL
All settings (UTILITY, STANDARD, CONTROL, PATCH) are transmitted.
UTILITY
System parameter settings are transmitted.
STANDARD
Standard Mode settings are transmitted.
CONTROL
Control Change Mode settings are transmitted.
PATCH
Patch Mode settings are transmitted.
 
Receiving Data from an External MIDI Device (Bulk Load)
For instructions on operating 
the MIDI sequencer, see the 
owner’s manual that came 
with your MIDI sequencer.
Just as when transmitting data 
to a MIDI sequencer, match the 
FC-300’s and MIDI sequencer’s 
Device ID settings (p. 52).
FC-300_e1.book 54 ページ ２００７年４月２４日　火曜日　午前１０時１０分