Yamaha 9000 pro User Manual

Up to a maximum of two Plug-in Boards can be installed to the 9000Pro (using 
both SLOT 1 and SLOT 2), giving you access to an extraordinarily wide range 
of sounds.

■ Plug-in Voices and Board Voices

For this example, [II] is 
selected.

sound one part (one Plug-in 
voice) at a time.  This means 
that the playing methods 
described on page 17 (turning 
parts R1 - R3 on simulta-
neously) and page 18 (turning 
parts R and L on simulta-
neously) cannot be used, even 
if you select the same slot’s 
Plug-in Board voices for the R1 
- R3 and L parts.

A

B

C

D

E

Press the corresponding buttons to 
select the various pages.

Multi-Part Plug-in Board (e.g., 
PLG100-XG) can be used with 
the 9000Pro, the voice list of 
the slot corresponding to the 
Multi-Part board cannot be dis-
played in the LCD.
See page 65 for details about 
the Multi-Part Plug-in Board.

The included floppy disk features specially programmed data (such as effect 
settings, etc.) for using the Plug-in Board Voices with the 9000Pro.  

• Before loading the disk data, the Board Voices (without any special 

processing or programming) are divided into groups of ten and are 
selectable from the PLUG-IN VOICE buttons [I] - [XI].

• Once the data on the disk is loaded, you have a new set of voices, 

programmed specifically for optimum use with the 9000Pro.  For a list of 
the available Plug-in Voices created with the data on the included floppy 
disk, see page 204.

Use these buttons to call up the Plug-in 
Voices. 
The Plug-in Voices area has 220 
available spaces for voices.  Voices can 
be loaded from the included disk (using 
the Plug-in Manager) or can be created 
via the Plug-in Custom Voice creator 
function (page 100). 

Use this button to call up the 
Board Voices. This allows you 
to select any of the original 
voices on the Plug-in Board. 

See page 66 
for details. 

Load

Save

41