Princeton Digital (USA) G9.2tt2q User Manual

WAH/EFX1 module

MOD/EFX2 module 

PRE-AMP module

DELAY module 

REVERB module 

In manual mode, you can use foot switches 1 – 5
to switch the major effect modules on or off. The
module/switch allocation is shown below. 
 

• When a module is switched on/off, the [STORE/

SWAP] key lights up. 

• In manual mode, you can use the knobs on the

panel as in play mode to adjust pre-amp
parameters, patch level, Accelerator, and
Energizer. For details on operation steps, see
"Adjusting the sound" in the section on play
mode (

→

 p. 15). 

• From manual mode you can switch to edit mode

for editing patches. For details on edit mode,
see page 24. 

 

W] foot switch. 

 

The changes that you have made to a patch will be
lost when you select another patch. To keep the
changes, store the patch first (

→ 

p.28). 

 
 

The G9.2tt incorporates a tuner function that supports regular chromatic tuning as well as special tuning.
This section explains the steps for using the tuner. 

To use the chromatic tuner function, proceed as
follows. 
 

Q] 

To use the tuner, the G9.2tt must be set to the
bypass condition (effects off) or mute condition
(original sound and effect sound both off). 
 

●

Hold the BANK [

Q] foot switch for about 1

second, until the indication "BYPASS" appears
on the display. Then release the foot switch.
The G9.2tt is now in the bypass condition. 

 

You can switch to the bypass condition by
pressing the [BYPASS/TUNER] key. 

 

●

Hold the BANK [

Q] foot switch until the

indication "BYPASS" changes to "MUTE".
Then release the foot switch. The G9.2tt is now
in the mute condition. 

After "BYPASS" or "MUTE" was shown, the
display automatically switches to the tuning
display. 

 

You can switch to the mute condition by pressing
and holding the [BYPASS/TUNER] key. 

 

• The built-in expression pedals function as

volume pedals in the bypass condition (in the
mute condition, the pedals have no effect). 

• By turning the parameter knob 2, you can select

other tuner types besides the chromatic tuner.
For more information, see the next section. 

• The number shown in reverse on the display

indicates that the corresponding parameter
knob can be used for adjustment. 

 

The [GROUP/BANK] indicator shows the note
which is closest to the current pitch. 

  BYPASS

  BYPASS

   MUTE

   MUTE

   >

   >˙<

™CHROMATC 

CHROMATC £440Hz

440Hz