Manualsbrain.com
  1. Manuals
  2. Brands
  3. Yamaha
  4. QL5
  5. User Manual

Yamaha QL5 User Manual

Download
Page of 58
Other functions
 Owner’s Manual
46
Initializing the unit to 
factory default settings
If an error occurs in the QL’s internal memory, or if you 
forget the password and cannot operate the unit, you 
can use the following procedure to initialize the internal 
memory. Use caution when performing the following 
steps.
NOTICE
When you initialize the internal memory, all content that 
had been saved in memory will be lost.
1.
Press and hold the [SEL] key for Fader B in the 
Master section on the panel while turning the 
power on.
After the opening screen, the startup menu screen 
will appear.
2.
On the startup menu screen, select the 
initialization method.
• INITIALIZE ALL MEMORIES
The entire memory including scene memories and 
libraries will be returned to their initial settings, 
except DANTE SETUP.
• INITIALIZE CURRENT MEMORIES
The entire memory, excluding scene memories and 
libraries, will be returned to its initial settings, 
except DANTE SETUP.
3.
Press the INITIALIZE button in the dialog box to 
confirm initialization.
4.
Press the OK button in the confirmation dialog 
box.
The Initialization operation starts.
NOTE
Do not press any buttons until initialization is complete.
5.
A message indicates that the initialization 
process is complete. Press the EXIT button.
The console will start up in normal operating 
mode.
NOTE
Alternatively, you can continue operation by selecting a 
different menu instead of pressing the EXIT button.
Adjusting the faders
(Calibration function)
Depending on the environment in which you use the 
console, discrepancies may occur in the motion of the 
motor faders. You can use the Calibration function to 
correct these discrepancies. With this operation, the 
specified faders in the channel strip section and Master 
section will be semi-automatically calibrated.
NOTE
For information about adjusting the input gain or the 
detection point of the touch screen, refer to the Reference 
Manual.
1.
Press and hold the [SEL] key for Fader B in the 
Master section on the panel while turning the 
power on.
After the opening screen, the startup menu screen 
will appear.
This window will also appear if a problem is 
detected in the fader settings while the QL is 
starting up.
2.
Press the FADER CALIBRATION button.
The FADER CALIBRATION MODE screen will 
appear, where you can adjust the faders.
3.
Press a [SEL] key to specify the faders that you 
want to calibrate.
Faders for which a problem was detected at 
start-up will already be selected.
4.
Press the START button.
5.
Press the OK button in the dialog box.
The fader specified in step 3 moves to –∞ (all the 
way down).
6.
If the fader position is not correct, move it 
manually to –∞ (all the way down).
7.
After you adjust the fader position, press the 
[NEXT] button.
The process will proceed to the next fader position.