Tascam DM-24 User Manual
•
AES/EBU can be input or output in DUAL LINE (HI SPEED will be supported
in a future version of firmware.) The IF-AE/DM AES/EBU option card
supports HI SPEED in version 1.11.
supports HI SPEED in version 1.11.
HIGH SPEED can send 2 channels of data at 96K on one AES/EBU cable. The
DM-24 has two AES/EBU I/Os built in. DUAL LINE requires both jacks to send
two channels. Some machines only use one format or the other. Some
machines do not call these modes HIGH SPEED and DUAL LINE. For instance,
the MX-2424 refers to DUAL LINE as ½ SPD, 2 Line.
DM-24 has two AES/EBU I/Os built in. DUAL LINE requires both jacks to send
two channels. Some machines only use one format or the other. Some
machines do not call these modes HIGH SPEED and DUAL LINE. For instance,
the MX-2424 refers to DUAL LINE as ½ SPD, 2 Line.
RECORDING AND MIXING SNAPSHOTS
As previously mentioned, there are recording and mixing snapshots built into
ROM on the DM-24. The last page of the DM-24 Quick Guide lists every
parameter in each snapshot. These snapshots were made from the perspective
of recording and mixing 24-bit files via TDIF, mixing down to a 16-bit 2-track
master. These will obviously not cover all situations. Think of them as a good
starting point from which you can create your own snapshots.
ROM on the DM-24. The last page of the DM-24 Quick Guide lists every
parameter in each snapshot. These snapshots were made from the perspective
of recording and mixing 24-bit files via TDIF, mixing down to a 16-bit 2-track
master. These will obviously not cover all situations. Think of them as a good
starting point from which you can create your own snapshots.
This document will change and grow during the life of the DM-24.
Check the TASCAM website (
Check the TASCAM website (
) for updates.
We will always label the document with the date it was last updated.