Yamaha 007POTO-G0 User Manual

LS9-16/32  Owner’s Manual

Here’s how to patch the desired channels to the input and output of the USB memory recorder. 
You can patch any desired output channel or the direct output of an INPUT channel to the 
recorder input, and you can patch the recorder output to any desired input channel.

In this screen you can assign signals to the input and 
output of the USB memory recorder, and perform 
recording and playback operations.

1

Here you can make settings for the recorder inputs.

B

These buttons access the OUTPUT CH SELECT 
popup window, where you can patch channels to the L/
R inputs of the recorder.

C

This knob adjusts the amount of attenuation/boost for 
the signal that is input to the recorder. You can adjust 
the value in 0.1 dB steps in a range of -96 to +24 dB. 
The current value is shown immediately below the 
knob.

D

This level meter indicates the level of the signal being 
input to the recorder.

E

This button cue-monitors the signal that is being input 
to the recorder. Move the cursor to the button and 
press the [ENTER] key to turn cue on/off.

F

Here you can make settings for the recorder outputs.

G

These buttons access the INPUT CH SELECT popup 
window, where you can patch channels to the L/R out-
puts of the recorder.

H

This level meter indicates the level of the signal being 
output from the recorder.

I

This button cue-monitors the signal that is being out-
put from the recorder. Move the cursor to the button 
and press the [ENTER] key to turn cue on/off.

The OUTPUT CH SELECT popup window will 
appear.

1

These tabs select the type of channels shown in the 
lower part of the window.

●

Output channels will be shown.

●

Direct outputs of INPUT channels 1–32 {1–32/
33–64} will be shown.

Assigning channels to the input/output of the recorder

1

2

3 4

6

5

8

9

7

1

2