Yamaha 007POTO-G0 User Manual

LS9-16/32  Owner’s Manual

16

Meters

Chapter 16

Meters

This chapter describes the meter screen which displays input/output level 
meters for all channels.

By accessing the Meter screen you can view the input/output levels of all channels in the screen, 
and switch the metering point (the location at which the level is detected) of the level meters.

The Meter screen is divided into the METER CH1-32 
screen, {METER CH 33-64 screen}, OUTPUT 
METER screen, and CUSTOM FADER screen.

1

Use these three buttons to select the metering point for 
the input/output channels.

B

These show the input/output levels or fader values. 
The current fader value is shown in a range of -

∞

–10. 

When you operate the corresponding fader, the value 
will change in realtime.

The 

∑ segment will light if even one of the level detec-

tion points within each channel is overloaded.
The 

∑ segment level detection points are as follows.

........... PRE HPF, PRE FADER, POST ON

........... PRE EQ, PRE FADER, POST ON

C

If you turn this button on, the peak levels of the meters 
will be held. When you turn this button off, the peak 
level indications that had been held will be cleared.

Using the METER screen

1

2

3

1

3

2

4

2

5