Yamaha 007POTO-G0 User Manual

LS9-16/32  Owner’s Manual

This section explains how to change the effect type and 
edit the parameters.

→ p. 158) steps 1–3, 

A rack in which an effect is mounted will indicate the 
effect type used by that effect, and the bypass on/off 
status.

1

B

The RACK screen will appear, allowing you to edit the 
parameters of the effect.
You can also access the RACK 5–8 screens by repeat-
edly pressing the [RACK 5-8] key.

1

This shows the effect title, the name of the type that is 
used, and a graphic. The number of input/output chan-
nels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also 
shown. If you move the cursor to the effect type 
graphic and press the [ENTER] key, the EFFECT 
TYPE popup window will appear, allowing you to 
select the effect type.

B

This button temporarily bypasses the effect.

C

This button cue-monitors the output of the currently 
displayed effect. This cue function is valid only while 
this screen is displayed. The cue will be cancelled 
automatically when you switch to a different screen.

D

This shows special parameters that are specific to 
some effect types.

E

These indicate the level of the signals before and after 
the effect.

F

These buttons display the OUTPUT CH SELECT 
popup window.

G

These buttons display the INPUT CH SELECT popup 
window.

H

This area shows parameters for the currently selected 
effect type.

1

The EFFECT TYPE popup window will appear.

Editing the internal effect parame-
ters

1

2

5

7

8

1

4

6

2

3

CLOSE button