Tascam 2488neo User Manual

TASCAM 2488neo

12 − Tempo and MIDI

MIDI remote control

From the SYNC/MIDI menu, this REMOTE option allows
the setting of a number of parameters connected with
remote control of the 2488neo.

MIDI messages can be used for remote control of the
2488neo’s mixer, effects and recorder.

MMC MODE

Sets the transmission mode for

MMC

(MIDI Machine Control).

OFF: MMC is not transmitted or received.

MASTER: The 2488neo is an MMC master.

SLAVE: The 2488neo is an MMC slave.

When the 2488neo is an MMC master, MMC commands
are sent from its

MIDI OUT

, for remote control of exter-

nal MMC slaves (including other 2488neo units). When
the 2488neo acts as an MMC slave, MMC commands are
received through its

MIDI IN

, and external MIDI devices

or another 2488neo can remotely control the 2488neo's
recorder.

MMC Device ID

Sets the MMC device ID. Select 1 to 127 or ALL. MMC
commands are sent and received between masters and
slaves with the same device IDs, but when ALL is selected,
MMC commands are sent and received for all IDs.

NOTE

MMC is used for remote transport control of MMC-
equipped devices, while MTC (MIDI Time Code) is used
to synchronize MTC-equipped devices.

Note that the MMC mode and MMC device ID are not
related to mixer and effect remote control.

REMOTE CONTROL

When

PROGRAM CHANGE SCENE

is ON, received Program

Change messages change scenes on the 2488neo. When

PROGRAM CHANGE EFF

is ON, received Program Change

messages change the 2488neo effects. When

CONTROL

CHANGE

is ON, received Control Change messages control

the 2488neo's mixer and effect parameters.