Panasonic AGHMX100PJ User Manual

Page of 48
29
Basic Oper
ation
Use the rotary 1 control to set the internal video output type 
to back matte video ([BACK MATTE]) or color bar output 
([COLOR BAR]). 
If [MEMORY] is selected, an external video input source 
can be saved in internal memory and used as internal 
video ( page 30).
Setting the Back Matte 
[BACK MATTE]
To create back matte video as internal video, use the 
[BACK MATTE] submenu of the [INT VIDEO] menu.
Rotary 1
Rotary 2
Rotary 3
Rotary 4
Rotary 5
WHITE
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
BLACK
CUSTOM1
CUSTOM2
LEVEL
 0-255
SET
 BACK M
 WASH
OFF
H1
H2
H3
V1
V2
V3
DIAG1
DIAG2
0-255
COLOR
BACK
WHITE
MATTE
0
LEVEL
255
PATTERN GRADE
H1
To set the back matte video color
1
 
To check the back matte video color, press the 
A/PROG INT (or B/PROG INT) button to set the 
currently displayed bus to the internal video.
2
 
Use the rotary 2 control to set [COLOR] to one 
of the colors shown in the table below.
Setting
Color
[WHITE] (factory default 
setting)
White
[YELLOW]
Yellow
[CYAN]
Cyan
[GREEN]
Green
[MAGENTA]
Magenta
[RED]
Red
[BLUE]
Blue
[BLACK]
Black
[CUSTOM1] or 
[CUSTOM2]
Grey as the factory 
default setting
The P
B
, P
R
, and Y values are shown in the joystick 
and rotary Z control settings, and 3D display display 
area ( page 20).
3
 
If [CUSTOM1] or [CUSTOM2] is selected in 
Step 2, set [SET] to [BACK M] (back matte) 
using the rotary 3 control and set [PATTERN] to 
[OFF] using the rotary 4 control.
4
 
If [CUSTOM1] or [CUSTOM2] is selected in 
Step 2, use the joystick and rotary Z control to 
set the [P
B
] and [P
R
] values in the range of 0 to 
255 and the [Y] value in the range of 16 to 235 
for selecting the back matte video color.
If other than [CUSTOM1] and [CUSTOM2] is 
selected, set the color level (the Y signal level 
for white) using the rotary 3 control.
To set the color gradation for back matte 
video
1
 
To check the back matte video color, press the 
A/PROG INT (or B/PROG INT) button to set the 
currently displayed bus to the internal video.
2
 
Use the rotary 2 control to set [COLOR] to one 
of the colors shown in the table below.
Setting
Color
[WHITE] (factory default 
setting)
White
[YELLOW]
Yellow
[CYAN]
Cyan
[GREEN]
Green
[MAGENTA]
Magenta
[RED]
Red
[BLUE]
Blue
[BLACK]
Black
[CUSTOM1] or 
[CUSTOM2]
Grey as the factory 
default setting
The P
B
, P
R
, and Y values are shown in the joystick 
and rotary Z control, and 3D display settings display 
area ( page 20).
3
 
Set [PATTERN] (gradation pattern) using the 
rotary 4 control.
Setting
Gradation pattern
[OFF]
No gradation
[H1]
Horizontal gradation 1
[H2]
Horizontal gradation 2
[H3]
Horizontal gradation 3
[V1]
Vertical gradation 1
[V2]
Vertical gradation 2
[V3]
Vertical gradation 3
[DIAG1]
Diagonal gradation 1
[DIAG2]
Diagonal gradation 2
4
 
If [CUSTOM1] or [CUSTOM2] is selected 
in Step 2, set [SET] to [WASH] (wash color 
meaning companion color for gradation) using 
the rotary 3 control.