Graco 312775G User Manual
Component Identification and Definition
10
312775G
Component Identification and Definition
F
IG
. 2. Manual System, shown with G3000 Meters, Color/Catalyst Change, One Gun Flush Box, and
Accessory Solvent Flow Meter
TI12504a
EK
BC*
ST
ACV
CCM*
MS
MA
MB
FM
GFB
BCV
FO*
PS*
Air Controls/
Filter
Filter
* See the ProMix 2KS
Repair-Parts manual for
optional cable lengths.
optional cable lengths.
Table 1: Component Descriptions
Component
Description
EasyKey (EK)
Used to set up, display, operate, and monitor the system. The EasyKey accepts 85-250
VAC, 50/60 Hz line power and converts that power to acceptable low voltage and optical
signals used by other system components.
VAC, 50/60 Hz line power and converts that power to acceptable low voltage and optical
signals used by other system components.
Booth Control (BC)
Used by the operator for daily painting functions including: choosing recipes, initiating job
complete, reading/clearing alarms, and placing the system in Standby, Mix, or Purge
mode. It is typically mounted inside the booth or near the painter.
complete, reading/clearing alarms, and placing the system in Standby, Mix, or Purge
mode. It is typically mounted inside the booth or near the painter.
Fluid Station (ST)
Includes air control solenoids, flow switches, and mountings for the fluid flow meters and
the fluid manifold assembly. Its control board manages all proportioning functions.
the fluid manifold assembly. Its control board manages all proportioning functions.