JVC KM-H2500E User Manual

For More Information on...
• creating a Split Key, refer to the section “Split Keys” 

Wipes can be modified to give more distinct qualities 
and personalize your transitions. The following effects 
can be adjusted:

• Time, Direction
• Pattern, Horizontal Multiplication, Vertical 

Multiplication

• X-Position, Y-Position, Aspect Ratio
• Border, Color, Soft
• Hue, Saturation, Luminosity
• Rotation

Press WIPE to display the Wipe menu.

Press NEXT until Time is displayed.

Use the Time knob to change the duration of the 
wipe.

Use the Direction knob to set the direction of the 
wipe. You can choose from the following:

• Fwd — Wipe runs in the forward (default) 

direction.

• Rev — Wipe runs in the reverse direction.

Press the Direction knob to alternately enable 
and disable the flip-flop direction feature. You 
can choose from the following:

• Enabled (FF) — The first time a wipe 

transition is performed, it runs in the forward 
direction. Performing a second wipe transition 
runs in the reverse direction.

• Disabled — Wipes always run in the direction 

specified in step 4 above. 

Press WIPE to access the Wipe menu.

Press NEXT to cycle through the available wipe 
modifiers.

Use the corresponding knob to change the 
following: 

• Pattern  (Pattrn) — to find and select a desired 

pattern.

• X Pos or Y Pos — to position the wipe 

pattern.

• Aspect — to adjust the aspect ratio.
• Border Size (Border) — to adjust the size of 

the border.

• Image Softness (Soft) — to blur or harden the 

border.

• Border color (these options only appear if you 

set the Border Size greater than 0.0%)
› Use the Load knob to select a preset color. 

Press the Load knob to load the color.

› Use the BHue, BSat, and BLum knobs 

until the desired color is achieved.

• Rotation (Rot) — to rotate the pattern.
• Horizontal  (HMult) and Vertical (VMult) 

Multiplication — to create multiple instances of 
the pattern.

• You can select a pattern using the Pattern Buttons. 

This also displays the Wipe menu.

• The X Pos and Y Pos can be adjusted using the 

positioner (KM-H 3000 only).

• Aspect adjustments are not available for all 

patterns.

• Circle, left square, right square, and diagonal 

patterns with aspect adjustments can not be 
rotated.

The switcher has three timed Aux buses which have 
access to the following sources:

• Any primary source (including Media-Store)
• Program
• Clean Feed
• Preview
• Chroma Key Alpha

KM-H3000: The Aux buses can be accessed from 
control panel buttons.

KM-H2500: The Aux buses can be accessed through 
the menu system.