Korg 61key User Manual
21
Playing and editing Programs
About the KROME’s Programs
Programs are the basic sounds of the KROME.
You can play them by themselves, layer them together
in Combinations, or play a different Program on each
of the 16 MIDI tracks, either from the internal
sequencer or from external computer‐based
sequencers.
in Combinations, or play a different Program on each
of the 16 MIDI tracks, either from the internal
sequencer or from external computer‐based
sequencers.
This section of the manual takes a quick look at playing
Programs, including tours of the front‐panel
controllers and basic editing techniques.
Programs, including tours of the front‐panel
controllers and basic editing techniques.
Playing Programs
Selecting Programs
There are several different ways to select Programs.
Each one is convenient in a different way:
Each one is convenient in a different way:
• Using “Program Select” and the VALUE
controllers:
• Using the Bank/Program Select menu:
• Using the Category/Program Select menu:
• Find
• Using a foot switch: page 19
• MIDI program change messages let you select
Programs remotely, from either a MIDI sequencer
or an external MIDI controller
or an external MIDI controller
For details, please see below.
Selecting a program using “Program
Select” and the VALUE controllers
Select” and the VALUE controllers
1. Press the PROG button. (The LED will light up.)
(Refer to the illustration below for the buttons.)
Alternatively, you can use the mode button (see
“Selecting modes” on page 9).
“Selecting modes” on page 9).
The KROME will enter Program mode.
2. Access the Prog P0: Play– Main page.
This is shown in the top line of the display.
If a different page is shown, press the EXIT button a
few times to return to the Prog P0: Play– Main page.
few times to return to the Prog P0: Play– Main page.
3. Make sure that “Program Select” is selected.
If it’s not selected, press “Program Select” in the
display or press the EXIT button to highlight the
indication.
display or press the EXIT button to highlight the
indication.
4. Select the program you want to play.
You can use the following methods to select a program.
• Use the INC or DEC buttons.
• Turn the VALUE dial.
• Use numeric keys 0–9 to enter the program number,
and press the ENTER button.
5. Press one of the PROG BANK A–F buttons to
select a bank.
When you select a different Bank, the button’s LED will
light up, and the selected bank will appear on the left
side of the display.
light up, and the selected bank will appear on the left
side of the display.
4: INC/DEC buttons
3: Program Select
2: PROG P0: Play
4: VALUE dial
1: ROG buttons
4: Numeric keypads
ENTER button
5: BANK A–F buttons
Velocity meter
1: Mode name
(button)
Mode button
Page number and name
Tab name
Program Select
(Program number and name)
(Program number and name)
Category Select popup button
(Category number and name)
(Category number and name)
Bank
number
number
Program Select popup button