Korg 2E ii User Manual

In Media mode you can use an SD card or a connected 
external SCSI device (if the separately sold EXB-SMPL 
is installed) to save or load various types of data. You 
can also make settings related to saving and loading 
functionality.

For details on connecting an external SCSI device and 
setting the SCSI ID, refer to refer to the manual 
included with the EXB-SMPL.

The SD card is not included. It must be purchased 
separately.

The TR supports SD cards with a power supply volt-
age of 2.7–3.6V and capacities of 16 MB - 1 GB, and SD 
card with ID.

If the EXB-SMPL option (sold separately) is installed, 
the TR can save data on external SCSI media (maxi-
mum 4 GB) such as a hard disk, Zip, Jaz, ORB, or MO 
drive.

When the EXB-SMPL option is installed, an external 
SCSI device of up to 4 GB can be formatted.

When you insert media for the first time after turn-
ing on the power, or after changing disks, you 
must press a function key etc. to make the TR 
detect the media. When the disk (or other media) 
is recognized, media information will appear in 
the LCD screen.

If more than one volume of media is currently rec-
ognized, select “Media” and use the [INC]/[DEC] 
keys to switch between media.

The TR cannot format media with a format of other 
than 512 bytes/block (such as 640 MB, 1.3 GB MO 
disks etc.).

SD card or external SCSI media (via the EXB-SMPL 
option) must be formatted.

Newly purchased media or media that has been used 
by another device cannot be used immediately on the 
TR. It must first be formatted for use on the TR.

The TR supports MS-DOS format.

For the formatting procedure, refer to “Format” (

Media must be formatted. SD cards or external 
SCSI media that was formatted on a device other 
than the TR may not be recognized correctly.

It is not possible to format media of other than 512 
bytes per block (e.g., 640 Mbyte or 1.3 Gbyte MO 
disks).

• The SD card may be hot immediately following use. 

Power-off the TR and wait for the card to cool 
before removing it.

• SD cards are precision parts. Do not bend them, 

drop them, or subject them to physical shock.

• Avoid using or storing SD cards in locations of 

extremely high or low temperature such as in direct 
sunlight, a closed automobile, or near a heater, or in 
locations of high humidity or excessive dust.

• Avoid using or storing SD cards in locations where 

they may be subject to strong static electricity or 
electrical noise.

• Do not allow dirt or foreign matter to adhere to the 

contacts of an SD card. If the contacts should 
become soiled, gently wipe them off using a dry 
cloth.

• When you are not using an SD card, keep it in the 

protective case that was included with the card to 
prevent it from being damaged by static electricity.

• Do not leave an SD card where it is accessible by 

infants or children who might place it in their 
mouth and swallow it.

• Carefully read and observe the owner’s manual 

included with your SD card.

SD cards have a write protect switch that prevents the 
data from being overwritten accidentally and lost. If 
you set the card’s switch to the “protected” setting, it 
will be impossible to write or erase data on the card, or 
to format it. If you need to save edited data on the card, 
move the switch back to its original “unprotected” set-
ting.