Korg 2E ii User Manual

If an SD card is inserted in the SD card slot, you can 
use it to save or load various types of TR data.

1 Insert an SD card in the SD card slot.

With the card label facing upward, insert the con-
nector end of the card into the SD card slot and 
press it in until you hear a click.

Make sure that the card is oriented correctly when 
you insert it. Forcing it in the wrong direction may 
damage the slot or the card, and the data may be 
lost.

Never remove an SD card from the slot while load-
ing, saving, or formatting is in progress.

1 Remove the card from the SD card slot.

Press the card inward; you will hear a click, and the 
card will pop out part-way, allowing you to pull it 
completely out.
Refer to the owner’s manual included with your 
card, and observe the guidelines for handling and 
use.

By installing the separately sold EXB-SMPL option you 
can add two channels of audio input jacks and a SCSI 
connector.

For details on installing the EXB-SMPL, refer to PG 
p.260.

Connect a mic or the OUTPUT jacks of an external 
audio device to the AUDIO INPUT 1, 2 jacks when you 
want to sample in Sampling mode (if the separately 
sold EXB-SMPL option is installed), or in Program, 
Combination, or Sequencer mode when you want to 
apply an internal effect to an external input sound and 
output the processed sound from the OUTPUT jacks.

You can connect SCSI-compatible devices (hard disks, 
CD-ROM drives etc.). (

☞

EXB-SMPL Operation Man-

ual)

SD card

SD card slot

If a passive type guitar (a guitar 
without an internal preamp) is 
connected, it will not be possible to 
sample at an appropriate level due to 
the impedance mismatch. Such 
instruments must be connected via a 
preamp or effect unit.