Korg 2E ii User Manual

Here’s how to playback the demonstration cue list. By 
using a cue list, you can repeatedly play multiple 
songs that you specify in the cue list, or play songs 
consecutively. (

1 Press the [MENU] key.

2 Press the [F2] key to select “Cue,” and then press 

The SEQ 2.1: Cue List, Setup&Play page will appear.

3 Press the [START/STOP] key.

4 To stop playback, press the [START/STOP] key 

If the last step is End, playback will stop automati-
cally when it reaches that point. If the last step is 
Continue to Step01

, playback will return to the first 

step and continue.

To select a cue list, choose “Cue List Select,” and 
use the same procedure as when selecting a song. 
Refer to step 4 above.

Preload PCG
• Preloaded data (programs, combinations, drum 

kits, arpeggio patterns, global settings)

When you load the preloaded data, it will be writ-
ten into internal memory. This data is preserved 
even when the power is turned off.

When this data is loaded, the current PCG data in 
the TR will be replaced. If you do not want to lose 
this data, save it to an SD card beforehand. (

Demo Songs
• Demonstration song and demonstration cue list 

data

This data is loaded into the internal sequencer 
memory. The data will be lost when the power is 
turned off.

When you load All Demo Songs, any data cur-
rently in the sequencer will be rewritten. If you 
wish to keep this data, you must first save it on an 
SD card before loading All Demo Songs. (