Korg 2E ii User Manual

3 Hold down the [ENTER] key and press the [REC/

The “Setup to Record” dialog box will appear.

4 Press the [F8] (“OK”) key to execute Auto Song 

When you execute Auto Song Setup, the TR will 
automatically enter the Sequencer mode, and the 
settings of the previously selected program or com-
bination will be applied to the song. The first 
unused song will be selected as the song.

Combination settings that are automatically set
The settings that are automatically made when you 
execute the Auto Song Setup command are the same 
as if you execute the “Copy From Combi” (

p.52) utility menu command after making the fol-
lowing settings in the dialog box.
• Check “with Effects”
• Set “To” to Track 1 to 8
• Check “Auto adjust Arp for Multi REC”

Program settings that are automatically set
If you execute Auto Song Setup from Program 
mode, the program will be selected for track 1, and 
the following settings will be made.
• Insert effect, master effect, and master EQ 

settings of the program

• Arpeggiator settings of the program
• Controller Setup (2.2: Ed-Ctrl) settings of the 

program

5 The TR will automatically enter record-ready 

6 Press the [START/STOP] key to begin realtime 

Here’s how to use the Copy From Combi page menu 
commands in Sequencer mode.

Make sure that the global MIDI channel (GLOBAL 
2.1: MIDI, “MIDI Channel”) is set to 01.

1 Create a new song. (

2 Execute the Utility menu command “Copy From 

A dialog box will appear.

Press the COMBI BANK [B] key, then press numeric 
keys [9], [9], and finally press the [ENTER] key. 
B099: Steely Keys will be selected.
We will copy the effect settings of the combination 
as well, so check the “With Effects” check box. 
Since we want to copy the settings of the combina-
tion’s eight timbres to tracks 1–8, select Track 1 to 8.
Press the [F8] (“OK”) key to execute the copy.

3 In the SEQ 1.1: Play/REC, Preference page, check 

When you perform multi-track recording, the multi-
ple channels that are being sounded by the arpeg-
giator will be recorded simultaneously.

4 Set the tracks not being recorded (i.e., tracks 9–16) 

5 Set “Track Select” to 01.

In order to play the sounds and arpeggiator in the 
same way as in Combination mode, set “Track 
Select

” to the track that matches the global MIDI 

. When you play the keyboard, the sounds 

will be heard just as in Combination mode.

6 Begin recording.

, the arpeggio pattern will start 

from the beginning at the moment that recording 
begins. Record your performance.

7 When you are finished performing, press the 

If you made a mistake or want to re-record, you can 
use the Compare function (press the [COMPARE] 
key) to re-record as many times as you want. (The 
“MultiREC” check box will be unchecked when you 
use Compare, so you will need to check it again.)