Sony SRP-V110 User Manual
9
1-2
3-4
5-6
7-8
2TR IN
L-R
8
1-2
3
4
5
6
7
AFL
PFL
+3
+1
+1
0
-1
-3
-5
-7
-7
-10
-20
-20
PEAK
VU
L
R
+5
+13
+11
+11
+10
+9
+7
+5
+3
+3
0
-10
+15
POWER
MONITOR
AUX MASTER
+48V
PHONES
AUDIO MIXER SRP-V110
-
∞
+10
0
+5
+10
-5
-10
-20
-
∞
0
-
∞
+10
0
-
∞
+10
0
-
∞
+10
0
-
∞
+10
0
-
∞
+10
0
-
∞
+10
0
-
∞
0
-
∞
0
AFL MONO
L/ODD
R/EVEN
PEAK
AFL
AFL
AFL
AFL
AFL
AFL
AFL
AFL
AFL
AFL
AFL
AFL
PRE
PRE
2TR IN
AUX 1-2
GRP1-2
GRP3-4
GRP5-6
GRP7-8
TO L-R
1
2
4
6
5
3
7
8
MASTER section
1 AUX MASTER controls
This controls the output level to the AUX OUTPUT
connector.
connector.
2 PRE buttons
This switches AUX 3 and AUX 4 for all channels
between the pre-fader and post fader. It is switched to
pre-fader when it is on, and post fader when it is off.
between the pre-fader and post fader. It is switched to
pre-fader when it is on, and post fader when it is off.
3 AFL buttons
The signals after the AUX MASTER volume are routed
to the PHONES or MONITOR OUT connectors, and
displays the level on the meter. When the AFL buttons
for a number of channels are turned on
simultaneously, they are output after being mixed.
However, when a PFL button is turned on, signals
from channels whose AFL buttons are pressed are not
routed, and only signals from channels whose PFL
buttons are pressed are routed.
to the PHONES or MONITOR OUT connectors, and
displays the level on the meter. When the AFL buttons
for a number of channels are turned on
simultaneously, they are output after being mixed.
However, when a PFL button is turned on, signals
from channels whose AFL buttons are pressed are not
routed, and only signals from channels whose PFL
buttons are pressed are routed.
4 2TR IN level control
This controls the level of the signals that are input
from the 2TR IN connector.
from the 2TR IN connector.
5 TO L-R button
This sends each signal to the MASTER L/R bus.
6 GROUP faders
This controls the level of the signals to be routed to the
MASTER L/R bus when signals are routed from the
GROUP bus to the GRP/DIRECT OUT connector and
the TO L-R button is turned on. Each GROUP fader
controls the signal level of every 2 channels, and each
channel is not controlled one by one.
MASTER L/R bus when signals are routed from the
GROUP bus to the GRP/DIRECT OUT connector and
the TO L-R button is turned on. Each GROUP fader
controls the signal level of every 2 channels, and each
channel is not controlled one by one.
7 AFL buttons
The signals after the GROUP fader or L/R fader are
routed to the PHONES and MONITOR OUT
connectors, and displays their levels on the meter.
However, when a PFL button is turned on, signals
from channels whose AFL buttons are pressed are not
routed, and only signals from channels whose PFL
buttons are pressed are routed. When the AFL buttons
for a number of channels are turned on
simultaneously, a mixed signal is routed.
routed to the PHONES and MONITOR OUT
connectors, and displays their levels on the meter.
However, when a PFL button is turned on, signals
from channels whose AFL buttons are pressed are not
routed, and only signals from channels whose PFL
buttons are pressed are routed. When the AFL buttons
for a number of channels are turned on
simultaneously, a mixed signal is routed.
8 L-R fader
This controls the level of the signals that are routed
from the MASTER L/R bus to the MASTER OUTPUT
connectors.
from the MASTER L/R bus to the MASTER OUTPUT
connectors.
Name and function of
each part