Sony 2-190-733-11 (1) User Manual

6

Names and Functions of Controls on Screen

D The index of the selected scene number is displayed.
E Click the Open button.

Save:  Saves the new data by overwriting the existing data.
Save as:  Saves the data under a different name.
Exit:  Exits the SRP-X500P Manager.

b

Activates/deactivates the communication between the 
SRP-X500P Manager and the mixer.  Also specifies the 
port number for RS-232C communication.
Connect:  Activates communication. Cannot be selected 

when the communication between the SRP-X500P 
Manager and the mixer is already activated.

Disconnect:  Deactivates communication. Cannot be 

selected when the communication between the SRP-
X500P Manager and the mixer is already deactivated.

Port select:  Specifies the port number for RS-232C 

communication to be used for SRP-X500P Manager 
operation.

c

Factory preset:  Resets all parameters to the default 

settings.

Password setting:  You can set a password.

A Enter a password.
B For confirmation, enter the same password again.
C Click “OK”.

If you enter the wrong password, you cannot start the SRP-
X500P Manager. Be sure to take a note of the password. 
If you forget the password, uninstall the software and then 
reinstall it from the supplied CD-ROM.

d

About:  The version of the software appears.

B Screen selection tabs
Click to select the setup screen for each parameter.

C CONNECTION indicator
Lights up green when the communication between the 
SRP-X500P Manager and the mixer is activated.

The BLOCK screen shows the internal block diagram of 
the mixer. You can click the button to turn each function 
on or off while monitoring overall settings on this screen.